Thanks. It works fine now.papyblaise wrote: ↑Mon Jul 04, 2022 7:42 am you must have the same number of segments in each scketches: so make the circle with 4 arcs
and they must all be in the same direction
Search found 6 matches
- Mon Jul 04, 2022 9:06 am
- Forum: Help on using FreeCAD
- Topic: SOLVED: additive loft calculation differs from subtractive loft calculation
- Replies: 4
- Views: 380
Re: additive loft calculation differs from subtractive loft calculation
- Mon Jul 04, 2022 7:48 am
- Forum: Help on using FreeCAD
- Topic: SOLVED: additive loft calculation differs from subtractive loft calculation
- Replies: 4
- Views: 380
- Mon Jul 04, 2022 7:22 am
- Forum: Help on using FreeCAD
- Topic: SOLVED: additive loft calculation differs from subtractive loft calculation
- Replies: 4
- Views: 380
SOLVED: additive loft calculation differs from subtractive loft calculation
Hi community! Just to get familiar with the loft tool I created an additive loft with a circle (XY-plane), slot (45 degree, datum-plane), rectangle (XZ-plane, 90 degree) and after that I created a subtractive loft on the same planes with smaller geometries. While the additive loft looks ok the subtr...
- Wed Jul 08, 2015 9:49 pm
- Forum: Python scripting and macros
- Topic: Ticket #2187 - Unusable Wire from Section
- Replies: 24
- Views: 7180
Re: Unusable Wire from Section
the solidworks guys have gone the easy way: with a circle as profile the profile orientation becomes irrelevant and always works. Your sweep does work with frenet=false flawless, so you could easily reproduce the solid works example. Of course with your triangle profile orientation becomes relevant...
- Wed Jul 08, 2015 6:33 pm
- Forum: Python scripting and macros
- Topic: Ticket #2187 - Unusable Wire from Section
- Replies: 24
- Views: 7180
Ticket #2187 - Unusable Wire from Section
Hello, attached you can find a macro creating eventually two sweeps. The sweep result with the standard helix is ok, but trying to use the special helix, created by a section, ends in an ugly structure. What are the exact steps to get a correct wire (path) for the sweep out of a section? Or is my ap...
- Sat Jun 20, 2015 10:42 am
- Forum: Python scripting and macros
- Topic: Gui not updated
- Replies: 1
- Views: 584
Gui not updated
Hello, I'm a newbie to FreeCAD and Python and want to show the visible parts of the active document from different sides with a short pause in between. The attached macro don't produce an error but only the last specified view is visibly executed at the end of the macro. What am I doing wrong? Thank...