this post is very simular:
https://forum.freecadweb.org/viewtopic.php?f=15&t=51138

This post is a bit similar withe the problem. To select the start point number for the entry maybe is a solution,too
https://forum.freecadweb.org/viewtopic.php?f=15&t=43896

I this this is not a good solution. Imagine just to cut a simple text (my example below has 81 cuts) Maybe someone have some good ideas to do it in a easy way? OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu) Word size of OS: 64-bit Word size of FreeCAD: 64-bit Version: 0.19.23463 (Git) AppImage Build type: Re...

my version: OS: Ubuntu 16.04.7 LTS (XFCE/xubuntu) Word size of OS: 64-bit Word size of FreeCAD: 64-bit Version: 0.19. Build type: Release Branch: unknown Hash: 1a2b75ab03fe8cc079011bd893f685864f9ae484 Python version: 3.5.2 Qt version: 4.8.7 Coin version: 4.0.0a OCC version: 7.3.0 Locale: German/Germ...

Same think for me working with a plasma cutter: My needs/wish list: - chose a individually start point for every cut. - I think it could be a huge improvement for the path-WB, if the Profil operation shows the single individual cuts somewhere. Than its possible to optimize the cutting order, too. An...

Habe gerade das gleiche Problem mit Debian 10 Buster. FreeCad version: AppImage 0.18.1614 geht ohne Probleme FreeCad version: AppImage 0.19.2219: freecad: ../nouveau/pushbuf.c:723: nouveau_pushbuf_data: Zusicherung »kref« nicht erfüllt. /tmp/.mount_FreeCA9p1ovl/AppRun: Zeile 41: 4813 Abgebrochen ${M...

Is very interesting and funny how many possibilities and opinions exists on how to design an simple object like a table. I'm start to thinking about the idea of having it similar to the "hello world" in other programms. I think a table and a chair would be a very good example, because this...

Yes, you must avoid the PartDesign WB, and use the Sketcher + Part WB's. You can create a custom toolbar in the Part WB and add the Sketcher tools to it. You will need to do a little extra work. For example a PartDesign Pad is = Part Extrude + Part Union. This is the beauty of FreeCAD. You can deve...

That was probably in 0.16, where it worked by some strange coincidence. Are shure that this is not a change some weeks ago? I always use the newest daily version, till the end of 2017, (and I very start to like this new part and body thing!) I did't noticed before about 2 weeks ago, that this is no...

That approach attempts to create two separate non-contiguous objects. That has never been allowed in the PartDesign workbench. Of course... I used this very often in nearly every freecad-design i did. This has become so handy for me over the time. (for example making a table with for legs half the ...