Search found 3336 matches

by user1234
Thu Mar 28, 2024 5:16 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 9
Views: 114

Re: Help with Pocketing

The tree shows an error (exclamation mark) which must be fixed: I do not have this, also no TNP. The only issue i found, is that the geometry from the initialed body SideEscapementBody have many geometry errors on top (the side, where it gets cut). I do not have found the reason for that, but i thi...
by user1234
Thu Mar 28, 2024 4:33 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 9
Views: 114

Re: Help with Pocketing

No sure I dare give out my file, it's my first ever FreeCad project and I'm sure it's full of awful things. No master is fallen from the heaven. You must start somewhere. I am sure, no one will laugh at it, why should one. Also obviously a without file it is just guesswork and much more work for he...
by user1234
Thu Mar 28, 2024 4:17 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 9
Views: 114

Re: Help with Pocketing

File for inspection please.


Greetings
user1234
by user1234
Thu Mar 28, 2024 3:38 pm
Forum: TechDraw
Topic: Delete Hatching for Single Face in Section View
Replies: 2
Views: 57

Re: Delete Hatching for Single Face in Section View

With hatching enabled, I want to remove the hatching only from a selected face / part - how is this done? Sadly as you workaround, there is no other way to do it. Even worse, when you add any crossing cosmetic lines afterwards, the hatching (and ore) gets most of the time corrupt too. Is it possibl...
by user1234
Thu Mar 28, 2024 2:43 pm
Forum: Help on using FreeCAD
Topic: Pocket breaks body (faces glitch away and distort)
Replies: 13
Views: 377

Re: Pocket breaks body (faces glitch away and distort)

I know there are many things to consider but "That's broken" There is no reason not to attach the sketch. Again, there are use cases, where no attachments required, even not unwanted. See usecases above. In PartWB you mostly work with attachment, because unwanted, it is on other type of w...
by user1234
Thu Mar 28, 2024 2:22 pm
Forum: Help on using FreeCAD
Topic: Pocket breaks body (faces glitch away and distort)
Replies: 13
Views: 377

Re: Pocket breaks body (faces glitch away and distort)

I manually changed to Sketcher, clicked new sketch and I get a pop-up asking what plane to use, I click XYPlane and the sketch starts. I draw a circle and close the sketch, if I look at properties there is NO Support. That seems wrong This is how it supposed to work. Note that Sketches are not Part...
by user1234
Thu Mar 28, 2024 2:00 pm
Forum: Help on using FreeCAD
Topic: Pocket breaks body (faces glitch away and distort)
Replies: 13
Views: 377

Re: Pocket breaks body (faces glitch away and distort)

No, if you select a face and start a sketch there will be Support and the face number, same with Datum planes. This is what i mean with selected planes. It doses not mean, that is a Origin plane. Plane as geometrical "plane". I would like to know what they did to get in that situation. Si...
by user1234
Thu Mar 28, 2024 1:51 pm
Forum: TechDraw
Topic: TechDraw - 3D aligned projection
Replies: 9
Views: 298

Re: TechDraw - 3D aligned projection

Couldn't they use a similar code to cut the unnecessary digits from the direction ? It is not that easy at it seems. Note that many views are not views, that are laying in the main directions. When you have views they are turned, you can unnecessary cut digits, which are important. Also the sum of ...
by user1234
Thu Mar 28, 2024 12:41 pm
Forum: Assembly
Topic: Integrated Assembly workbench
Replies: 14
Views: 881

Re: Integrated Assembly workbench

bambuko wrote: Thu Mar 28, 2024 12:32 pm You don't save the file mid-edit....
+1, that would be weird and error prone.


Greetings
user1234
by user1234
Thu Mar 28, 2024 12:34 pm
Forum: Open discussion
Topic: Forum very very slow (again)
Replies: 4
Views: 113

Re: Forum very very slow (again)

Yes, it is sometimes sluggish again. Sometimes it is almost normal.

Greetings
user1234