Search found 3333 matches
- Thu Mar 28, 2024 3:38 pm
- Forum: TechDraw
- Topic: Delete Hatching for Single Face in Section View
- Replies: 1
- Views: 26
Re: Delete Hatching for Single Face in Section View
With hatching enabled, I want to remove the hatching only from a selected face / part - how is this done? Sadly as you workaround, there is no other way to do it. Even worse, when you add any crossing cosmetic lines afterwards, the hatching (and ore) gets most of the time corrupt too. Is it possibl...
- Thu Mar 28, 2024 2:43 pm
- Forum: Help on using FreeCAD
- Topic: Pocket breaks body (faces glitch away and distort)
- Replies: 13
- Views: 348
Re: Pocket breaks body (faces glitch away and distort)
I know there are many things to consider but "That's broken" There is no reason not to attach the sketch. Again, there are use cases, where no attachments required, even not unwanted. See usecases above. In PartWB you mostly work with attachment, because unwanted, it is on other type of w...
- Thu Mar 28, 2024 2:22 pm
- Forum: Help on using FreeCAD
- Topic: Pocket breaks body (faces glitch away and distort)
- Replies: 13
- Views: 348
Re: Pocket breaks body (faces glitch away and distort)
I manually changed to Sketcher, clicked new sketch and I get a pop-up asking what plane to use, I click XYPlane and the sketch starts. I draw a circle and close the sketch, if I look at properties there is NO Support. That seems wrong This is how it supposed to work. Note that Sketches are not Part...
- Thu Mar 28, 2024 2:00 pm
- Forum: Help on using FreeCAD
- Topic: Pocket breaks body (faces glitch away and distort)
- Replies: 13
- Views: 348
Re: Pocket breaks body (faces glitch away and distort)
No, if you select a face and start a sketch there will be Support and the face number, same with Datum planes. This is what i mean with selected planes. It doses not mean, that is a Origin plane. Plane as geometrical "plane". I would like to know what they did to get in that situation. Si...
- Thu Mar 28, 2024 1:51 pm
- Forum: TechDraw
- Topic: TechDraw - 3D aligned projection
- Replies: 9
- Views: 291
Re: TechDraw - 3D aligned projection
Couldn't they use a similar code to cut the unnecessary digits from the direction ? It is not that easy at it seems. Note that many views are not views, that are laying in the main directions. When you have views they are turned, you can unnecessary cut digits, which are important. Also the sum of ...
- Thu Mar 28, 2024 12:41 pm
- Forum: Assembly
- Topic: Integrated Assembly workbench
- Replies: 12
- Views: 823
- Thu Mar 28, 2024 12:34 pm
- Forum: Open discussion
- Topic: Forum very very slow (again)
- Replies: 4
- Views: 109
Re: Forum very very slow (again)
Yes, it is sometimes sluggish again. Sometimes it is almost normal.
Greetings
user1234
Greetings
user1234
- Thu Mar 28, 2024 12:24 pm
- Forum: Open discussion
- Topic: Forum very very slow (again)
- Replies: 4
- Views: 109
Re: Forum very very slow (again)
@kkremitzki seems to have done his magic. It works now much better. Thanks!
Gretings
user1234
Gretings
user1234
- Thu Mar 28, 2024 12:22 pm
- Forum: Open discussion
- Topic: Sketcher: Snapping to external edges automatically
- Replies: 9
- Views: 292
Re: Sketcher: Snapping to external edges automatically
If you want to do anything in the sketcher, i had an other idea: section geometry is missing.
Greetings
user1234
Greetings
user1234
- Thu Mar 28, 2024 12:01 pm
- Forum: Open discussion
- Topic: Forum very very slow (again)
- Replies: 4
- Views: 109
Forum very very slow (again)
Have some else this behavior?
If yes, @kkremitzki can you look at it?
Greetings
user1234
If yes, @kkremitzki can you look at it?
Greetings
user1234