Search found 3340 matches

by user1234
Thu Mar 28, 2024 6:47 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 18
Views: 219

Re: Help with Pocketing

chrisb wrote: Thu Mar 28, 2024 6:40 pm This is what I see on opening your file
I use also 0.22main (a few hours old), but i also do not get these errors. Only the normal follow up errors due TNP.


Greetings
user1234
by user1234
Thu Mar 28, 2024 6:17 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 18
Views: 219

Re: Help with Pocketing

So now i have dense it down. Also now i can replicate the exclamation mark fro chrisb. The issue are the many coplanar cuts due lofts. When i change e.g. SketchSole in z direction a little bit, it works instant. But then you get issues with the other lofts (e.g. TNP and other loft issues). Normally ...
by user1234
Thu Mar 28, 2024 6:00 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 18
Views: 219

Re: Help with Pocketing

It start to work when relink the LoftMortiseFromTop.


2024-03-28_19-01.png
2024-03-28_19-01.png (173.39 KiB) Viewed 52 times

After recomputing the sketches below, it gets error in the lofts. I think there is something fishy in the sketches.


Greetings
user1234
by user1234
Thu Mar 28, 2024 5:31 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 18
Views: 219

Re: Help with Pocketing

steve355 wrote: Thu Mar 28, 2024 5:26 pm I think those might by "old" sketches that I thought were gone.
In fact the error area with that many sweeps overlaps (which do not self intersect, which is good) is indeed very tattered. But i do not know, if that many sweeps was on purpose.


Greetings
user1234
by user1234
Thu Mar 28, 2024 5:16 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 18
Views: 219

Re: Help with Pocketing

The tree shows an error (exclamation mark) which must be fixed: I do not have this, also no TNP. The only issue i found, is that the geometry from the initialed body SideEscapementBody have many geometry errors on top (the side, where it gets cut). I do not have found the reason for that, but i thi...
by user1234
Thu Mar 28, 2024 4:33 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 18
Views: 219

Re: Help with Pocketing

No sure I dare give out my file, it's my first ever FreeCad project and I'm sure it's full of awful things. No master is fallen from the heaven. You must start somewhere. I am sure, no one will laugh at it, why should one. Also obviously a without file it is just guesswork and much more work for he...
by user1234
Thu Mar 28, 2024 4:17 pm
Forum: Help on using FreeCAD
Topic: Help with Pocketing
Replies: 18
Views: 219

Re: Help with Pocketing

File for inspection please.


Greetings
user1234
by user1234
Thu Mar 28, 2024 3:38 pm
Forum: TechDraw
Topic: Delete Hatching for Single Face in Section View
Replies: 2
Views: 85

Re: Delete Hatching for Single Face in Section View

With hatching enabled, I want to remove the hatching only from a selected face / part - how is this done? Sadly as you workaround, there is no other way to do it. Even worse, when you add any crossing cosmetic lines afterwards, the hatching (and ore) gets most of the time corrupt too. Is it possibl...
by user1234
Thu Mar 28, 2024 2:43 pm
Forum: Help on using FreeCAD
Topic: Pocket breaks body (faces glitch away and distort)
Replies: 13
Views: 402

Re: Pocket breaks body (faces glitch away and distort)

I know there are many things to consider but "That's broken" There is no reason not to attach the sketch. Again, there are use cases, where no attachments required, even not unwanted. See usecases above. In PartWB you mostly work with attachment, because unwanted, it is on other type of w...
by user1234
Thu Mar 28, 2024 2:22 pm
Forum: Help on using FreeCAD
Topic: Pocket breaks body (faces glitch away and distort)
Replies: 13
Views: 402

Re: Pocket breaks body (faces glitch away and distort)

I manually changed to Sketcher, clicked new sketch and I get a pop-up asking what plane to use, I click XYPlane and the sketch starts. I draw a circle and close the sketch, if I look at properties there is NO Support. That seems wrong This is how it supposed to work. Note that Sketches are not Part...