Use the PNG file
Downgrade in Draft
Convert to scetch in Draft
Drop the sketch in the Body
Pad the sketch
Search found 1854 matches
- Tue Apr 16, 2024 1:47 pm
- Forum: Help on using FreeCAD
- Topic: Importing a sticker with lettering looks ugly (the middle of the letters are filled)
- Replies: 3
- Views: 324
- Wed Apr 10, 2024 3:45 pm
- Forum: Help on using FreeCAD
- Topic: Unfolding Sheet Metal Failure
- Replies: 7
- Views: 440
Re: Unfolding Sheet Metal Failure
Unfold works here in version 0.22dev
Does not work in 0,21
Does not work in 0,21
- Sat Feb 10, 2024 7:05 pm
- Forum: Help on using FreeCAD
- Topic: Best way to create a 'lip' on a box
- Replies: 4
- Views: 463
Re: Best way to create a 'lip' on a box
For adding the sketch of the hole to the top I prefer to give the sketch in Z direction with an expression the length of the Pad .
The Additive Pipe works but in the menu the right values must be chosen for Corner transmission and orientation mode.
Check my drawing
The Additive Pipe works but in the menu the right values must be chosen for Corner transmission and orientation mode.
Check my drawing
- Wed Jan 31, 2024 4:45 pm
- Forum: Help on using FreeCAD
- Topic: [Solved] Scale of View in Techdraw accepts only some values
- Replies: 6
- Views: 435
Re: Scale of View in Techdraw accepts only some values
Welcome to the forum.
It is really confusing but the scale must not be made in the View menu but in the Page menu.
If you need a view with a different scale you need to insert a Detail view
It is really confusing but the scale must not be made in the View menu but in the Page menu.
If you need a view with a different scale you need to insert a Detail view
- Wed Jan 24, 2024 2:19 pm
- Forum: Help on using FreeCAD
- Topic: overconstraint with arc slot
- Replies: 8
- Views: 617
Re: overconstraint with arc slot
Three arcs have a coincident constraint with the origin. You only need one because the other two are parallel
- Sun Jan 21, 2024 3:05 pm
- Forum: Help on using FreeCAD
- Topic: Draft Fillet construction: Error, radius too large
- Replies: 3
- Views: 402
Re: Draft Fillet construction: Error, radius too large
Welcome to the forum.
Please upload your file so we can investigate this
Please upload your file so we can investigate this
- Mon Jan 01, 2024 2:49 pm
- Forum: Help on using FreeCAD
- Topic: Challenges?
- Replies: 627
- Views: 103719
Re: Challenges?
The method to do this is simple
- import in Freecad
- Convert in Part wb to Solid
- In Part wb make a Cross section
- In Draft wb convert to sketch
- Open sketch and block a line and an arc
- Dimension the Arc and make dimension 1 mm larger
- Extrude in Part wb and export to STP
- import in Freecad
- Convert in Part wb to Solid
- In Part wb make a Cross section
- In Draft wb convert to sketch
- Open sketch and block a line and an arc
- Dimension the Arc and make dimension 1 mm larger
- Extrude in Part wb and export to STP
- Thu Dec 28, 2023 9:36 pm
- Forum: Help on using FreeCAD
- Topic: Input error "Still in reference selection mode" using "Revolution" functionality
- Replies: 3
- Views: 414
Re: Input error "Still in reference selection mode" using "Revolution" functionality
Draw in the sketch a construction line. Only construction lines ca be selected for reference.
- Thu Dec 21, 2023 8:54 am
- Forum: Help on using FreeCAD
- Topic: Creating text on a mirrored surface
- Replies: 8
- Views: 576
Re: Creating text on a mirrored surface
Try 'Refine' on the mirrored part. Often that will help
- Fri Dec 15, 2023 5:54 pm
- Forum: Help on using FreeCAD
- Topic: Creating a scribble
- Replies: 11
- Views: 4208
Re: Creating a scribble
I will test the method of Roy but my simple solution is to open the SVG file in Inkscape and change it with the fill and stroke function. Now you have created a drawing with the ouitlines. This can be imported in Freecad and changed in Draft wb to a sketch. After a validate this can be Extruded. Iin...