Search found 49 matches

Go to advanced search

by 71GA
Wed Aug 14, 2019 7:47 am
Forum: TechDraw
Topic: Circles detected as elipses...
Replies: 7
Views: 576

Re: Circles detected as elipses...

@chrisb I used the FCCamera and aligned my view to the plane. Well, holes are still seen as elipses. I also tried development version Appimage and it suffers same symptoms. What is next? Holes were made as a circles in a sketch which i put directly on the plane and then I used Hole function of the p...
by 71GA
Tue Aug 13, 2019 9:38 pm
Forum: TechDraw
Topic: Circles detected as elipses...
Replies: 7
Views: 576

Circles detected as elipses...

Hey, I am trying to dimension this part in TechDraw workbench but with no sucess, because Techdraw keeps on detecting my holes as elipses. There are a couple holes that are angled, but that's only a few... Could anyone advise me on how to dimension this? I have NO clue because it looks like Techdraw...
by 71GA
Sat Aug 10, 2019 9:52 pm
Forum: Help on using FreeCAD
Topic: TechDraw workbench - labeling parts of an assembly
Replies: 19
Views: 1238

Re: TechDraw workbench - labeling parts of an assembly

Thank you for the AppImages. I tried v0.19 and TechDraw is too bugy to use for production... Looks like bugs are multiplying like musrooms after the rain. Maybee stop the advancment untill current bugs are fixed?
by 71GA
Sat Aug 10, 2019 8:43 pm
Forum: TechDraw
Topic: Techdraw - no center snap points are shown
Replies: 25
Views: 3447

Re: Techdraw - no center snap points are shown

I am trying to dimension a rod in a Techdraw with a bunch of screw holes, but i can't, because there is no snap points in the middle of the circles. Why are they instead drawn at the side of the circles? Also there are none drawn for hidden edges (circles or straight lines)! I see 1 circle in the s...
by 71GA
Sat Aug 10, 2019 8:38 pm
Forum: Help on using FreeCAD
Topic: TechDraw workbench - labeling parts of an assembly
Replies: 19
Views: 1238

Re: TechDraw workbench - labeling parts of an assembly

Hello! I know, but installing Freecad like that breaks your distribution. No, make a lokal build and do not install it. You can start FreeCAD from the bin folder. And if you want to delete the built, just delete it. Greetings user I tried and failed as Debian lacks libraries needed to compile. I wo...
by 71GA
Sat Aug 10, 2019 8:36 pm
Forum: TechDraw
Topic: Created section, can't seem to move the section line.
Replies: 3
Views: 431

Re: Created section, can't seem to move the section line.

I have the same problem. On some pieces it works but on others it won't work. For example I can set section origin coordinates and when I refresh using F5 everything goes back to the way it was. :roll: Looks like something is resetting the values... (v18)
by 71GA
Mon Aug 05, 2019 12:13 pm
Forum: Help on using FreeCAD
Topic: Debug Thread out of range
Replies: 6
Views: 1395

Re: Debug Thread out of range

This does not occur in 0.18, but it occurs again in 0.19 development appimage. I tested this for a same project opened in both versions.
by 71GA
Mon Aug 05, 2019 6:33 am
Forum: TechDraw
Topic: Techdraw - no center snap points are shown
Replies: 25
Views: 3447

Re: Techdraw - no center snap points are shown

chrisb wrote:
Mon Aug 05, 2019 6:29 am
Is this a Sketcher, Draft or TechDraw help request?
I added some details. It is Techdraw workbench.
by 71GA
Mon Aug 05, 2019 6:26 am
Forum: TechDraw
Topic: Techdraw - no center snap points are shown
Replies: 25
Views: 3447

Techdraw - no center snap points are shown

I am trying to dimension a rod in a Techdraw with a bunch of screw holes, but i can't, because there is no snap points in the middle of the circles. Why are they instead drawn at the side of the circles? Also there are none drawn for hidden edges (circles or straight lines)! How to overcome this iss...
by 71GA
Fri Aug 02, 2019 4:38 am
Forum: TechDraw
Topic: Techdraw WB - some weird lines are shown
Replies: 6
Views: 625

Re: Techdraw WB - some weird lines are shown

dcapeletti wrote:
Thu Aug 01, 2019 11:12 pm
Hi, something similar happens to what happened to me. A few days ago I published it. https://forum.freecadweb.org/viewtopic.php?f=35&t=38118
Did you have transparency turned ON? I think it might be correlated to this...

Go to advanced search