Search found 1952 matches

Go to advanced search

by herbk
Fri Jul 14, 2017 5:17 pm
Forum: Path/CAM
Topic: some little things on naming
Replies: 20
Views: 1626

some little things on naming

Here a behavior where i'm in mind, that it's not coused by the path WB, but i'm not sure... first time i used the "raw part object" i gettingconfused by the naming of the part: All things i try'd, i made with base object Fusion002 in object tree, but the stock gets named to "Fusion001001_Stock". At ...
by herbk
Fri Jul 14, 2017 4:28 pm
Forum: Path/CAM
Topic: (solved) Facing operation Ignores objects over the surface
Replies: 2
Views: 319

(solved) Facing operation Ignores objects over the surface

i try'd to get a surface for a hight which is not on the top level. In this case Facing ignores the parts above the selected high. test_3_3.jpeg Also the path has two cutting levels with a given stepdown of 5mm, with a green line only 1mm above the final depht A Facing operation for the octagon give...
by herbk
Fri Jul 14, 2017 4:00 pm
Forum: Path/CAM
Topic: Pocket operation, some litte bugs
Replies: 0
Views: 269

Pocket operation, some litte bugs

Hi, i made a little "milling object" to test the new functions on the machine, but on some operations i found a few things: test_3_1.jpeg "Start at" is set to "center", but the operation starts at outside The path for the pentagon pocket shows only the outer two lines. Thats only a display problem (...
by herbk
Thu Jul 13, 2017 7:02 am
Forum: Forum in Deutsch
Topic: Mouse -> Rotationsbewegung = Objekt weg (gelöst)
Replies: 6
Views: 1065

Re: Mouse -> Rotationsbewegung = Objekt weg

Hi, Du hast sicher mit einer wilden Tastenkombination das "Übersetzungsverhältnis" verändert. Sie mal in den Einstellungen unter Anzeige nach was da eingetragen ist. - bei mir sieht das so aus: zoom.jpeg @ Chris: Sooo instabil ist die .17 nun auch wieder nicht... ;) ;) Ich empfehle eigentlich sogar ...
by herbk
Thu Jul 13, 2017 5:56 am
Forum: Path/CAM
Topic: [solved] Pocket from Face is broken
Replies: 12
Views: 1144

Re: [solved] Pocket from Face is broken

Hi sliptonc,
the step over is only in one direction down to 50%, other seams to be 100%?
by herbk
Wed Jul 12, 2017 8:29 am
Forum: Forum in Deutsch
Topic: Diskussion Path Workbench
Replies: 4
Views: 427

Re: Diskussion Path Workbench

Hi Chris, Der Unterschied ist also nur die Vorbelegung, bisher ist die immer 0, was ja in fast allen Fällen verkehrt ist, und in Zukunft kann es eben auch etwas einigermaßen Sinnvolles sein. Diese "sinnvolle Vorbelegung" sehe ich sehr kritisch, zumindest so bald sie mit FC "ausgeliefert" wird. Sinnv...
by herbk
Wed Jul 12, 2017 5:29 am
Forum: Path/CAM
Topic: Menu Errata
Replies: 9
Views: 739

Re: Menu Errata

@admin: @sliptonic may approve it, but I think this should be moved to the general Help or to the developer forum. I think Chris is right. I have the same behavior in other menues to: double.jpeg OS: "openSUSE Leap 42.2" Word size of OS: 64-bit Word size of FreeCAD: 64-bit Version: 0.17.10236 (Git)...
by herbk
Fri Jul 07, 2017 8:03 am
Forum: Forum in Deutsch
Topic: 3D Fräsdatei erzeugen aber wie
Replies: 8
Views: 1586

Re: 3D Fräsdatei erzeugen aber wie

Ist es damit auch einfach möglich 3D bzw. 2 ½D G-Code zu erzeugen? ja, nicht alles, aber es geht schon recht viel. Problematisch ist noch fast alles was nicht senkrechte Wände hat. Von dem was im englishen Forum diskutiert wird, ist auch einiges noch gar nicht in der master des dayli repos integrie...
by herbk
Thu Jul 06, 2017 3:48 pm
Forum: Path/CAM
Topic: Path profile corner handeling
Replies: 7
Views: 886

Re: Path profile corner handeling

ah, ok,
but need this machines a offset? doesn't they calculate it also by itself?
Some Lasercutters (of firms i work with) does it, becouse they can change the diameter off the beam and so they calculate the offset, fitting to the beam, to.
by herbk
Thu Jul 06, 2017 3:24 pm
Forum: Path/CAM
Topic: Path profile corner handeling
Replies: 7
Views: 886

Re: Path profile corner handeling

Hi,
doesn't "set the path to on" make the same?

I use it if i want to use a external machine of a shop where i not know which tolls are availible. They use LinuxCNC which has a includet "tool and corner management" also and it works fine with an uncompensated path.

Go to advanced search



cron