Hi
If it's only to keep a printed trace of your drawing and without scale, you can take a screenshot and print

Hi I am having fun drawing your hook, it remains some small angles to polish, but you want to print it 3D so it will be necessary to polish it with the abrasive paper it is necessary to print it to use the raft and the cylinder support (in transparent green) that I add, I advise you to use the mater...

and if you increase the radii:

Hi
This object is a reinforcement between 2 tubes of structure, so you draw the 2 tubes and the reinforcement by a loft between 2 sketches, and make filets to the lines of welds

Today is a holiday in France (do not laugh) and there is no newspaper, so I tried with Partdesign .... miss .... I surely do a ....... somewhere

Hi Complete is a customizable workshop, You go in Tool / Customize / Toolbar on the right you choose Complete in the tab sup and you choose in the left frame the tools of other bars that you want to duplicate and sending them to the right with the arrow to the right Farme Fc, at the next opening, th...

Hi Another method, using an intermediate cutting object, First, not to make work difficult, tilts the tube 45 ° in one axis (not in X and Y) Draw a new sketch using the reference tool (big blue square, which makes the purple ref) and Pad And you do a Boolean subtraction for one and Common for the ot...

Hi It's stupid to use "Hole to drill a hole, it's better to constrain the circle in diameter and use " Pocket, unless you want to make a cuntersink or the hole before tapping Personally I know by memory all the diameter of drilling of M3 to M16 and for the others I know that the diameter o...

You tried to reproduce my method, you have to improve it: shift the top edge of the triangle "sketch002" so that it is not coplanar with the edge of Grove, offset by -0.5mm in X so that it is beyond the outside of the chamfer, do a first Boolean subtraction with the 20 th teeth, then do a ...

Ok