Search found 4166 matches
- Sat Jan 13, 2024 1:39 pm
- Forum: Help on using FreeCAD
- Topic: How to replace chamfer with fillet automatically?
- Replies: 3
- Views: 1971
Re: How to replace chamfer with fillet automatically?
Fillets create tangential edges. And material could be added/removed betwen those edges thus converting the fillet to chamfer. Chamfers also propagate along tangential edges. Fillet could be converted to regular 45deg chamfers. "Non 45deg"/"non equal length" chamfers could be co...
- Sat Jan 13, 2024 10:49 am
- Forum: Help on using FreeCAD
- Topic: PD CUT and Part CUT yielding different results
- Replies: 10
- Views: 5785
Re: PD CUT and Part CUT yielding different results
Your sketches are not fully constrained, your bodies are at some weird orientation. How do you expect exact results is beyound me...
How did you position those bodies in such a way? What is with the broken body (all those Pads that are not under a body)?
How did you position those bodies in such a way? What is with the broken body (all those Pads that are not under a body)?
- Sat Jan 13, 2024 10:26 am
- Forum: Help on using FreeCAD
- Topic: How to replace chamfer with fillet automatically?
- Replies: 3
- Views: 1971
How to replace chamfer with fillet automatically?
Is there a way (command/macro/...) to automatically replace a fillet/chamfer with a corresponding chamfer/fillet under PD body? Search did not give any results. I modeled a piece after the original injection molded one. Now I want to 3D print it but of cource the original is rounded all over and for...
- Wed Jan 10, 2024 2:53 pm
- Forum: Help on using FreeCAD
- Topic: hidden tasks.
- Replies: 12
- Views: 27133
Re: hidden tasks.
Under Windows you can move/stack/arrange them relatively free. Since those are Qt windows cant you just arrange them as you desire? I have Tasks and selection overlayed on the right upper part of man window, DAG, Report view, Python console overlayed and placed under them... Just arange them as you ...
- Wed Jan 10, 2024 11:13 am
- Forum: Open discussion
- Topic: Groove cut along any plane
- Replies: 4
- Views: 11776
Groove cut along any plane
I had an idea how to make a groove along the outer surface of a body lying on an arbitrary cross section. First idea was to use SubShapeBinder 2d offset but this failed on the generated cross section (and would probably fail on most arbitrary cross sections). So the next idea was to make a subtracti...
- Sun Jan 07, 2024 9:12 am
- Forum: Help on using FreeCAD
- Topic: TechDraw: How do I add dimensioning to rounded corners the elegant way?
- Replies: 8
- Views: 6717
Re: TechDraw: How do I add dimensioning to rounded corners the elegant way?
Aren't those rounds actually arches? What is wrong with dimensioning them as such with their radius? 4xR2? And why didn't you constraint them as radiuses in the sketch?
- Sat Jan 06, 2024 9:06 am
- Forum: Help on using FreeCAD
- Topic: Dado / groove for woodworking - Boolean "keep tool"
- Replies: 25
- Views: 6254
Re: Dado / groove for woodworking - Boolean "keep tool"
Here is how I would have done it. Since those are simple shapes create the main shape by convenient cross section and use a SubShapeBinder with desired offset to cut desired dados.
- Tue Jan 02, 2024 7:49 pm
- Forum: Help on using FreeCAD
- Topic: Constraints Visible but the lines of the shape not
- Replies: 3
- Views: 672
Re: Constraints Visible but the lines of the shape not
Can you show a screenshot of that state? Also check IMPORANT link above and post your FeeCAD infos.
- Tue Jan 02, 2024 6:02 pm
- Forum: Help on using FreeCAD
- Topic: [Solved] Impossible to mirror a sketch
- Replies: 5
- Views: 733
Re: Impossible to mirror a sketch
Or Multitransform with 3 item linear pattern in one direction and then mirror to get the other half.
- Tue Jan 02, 2024 5:25 pm
- Forum: Help on using FreeCAD
- Topic: Crash When Applying Constraints To Imported Geometry
- Replies: 10
- Views: 1921
Re: Crash When Applying Constraints To Imported Geometry
No problems here. I tried importing edge that imports as line, constraining to one of its points - Ok. Imported edge that imports as point, constrained to it - Ok. Where are you getting your version? Self compiled from the original sources (no changes to the code) because conda builds dont work ok o...