I fail in lining up the camera view in the direction of the plane (how should I do that?)
Search found 150 matches
- Thu Mar 31, 2022 1:37 pm
- Forum: Help on using FreeCAD
- Topic: From 3D part to 2D sketch, whatever the camera position
- Replies: 18
- Views: 2227
Re: From 3D part to 2D sketch, whatever the camera position
I have the feeling Draft Shape2DView is something I can use. Apart from the fact that I get also the internal edges inside the produced Shape2DView (I prefer only the outer line). And still...
- Thu Mar 31, 2022 1:03 pm
- Forum: Help on using FreeCAD
- Topic: From 3D part to 2D sketch, whatever the camera position
- Replies: 18
- Views: 2227
Re: From 3D part to 2D sketch, whatever the camera position
Hi Newjoker
That is correct....but I assume that you need editable sketch....
- Thu Mar 31, 2022 12:25 pm
- Forum: Help on using FreeCAD
- Topic: From 3D part to 2D sketch, whatever the camera position
- Replies: 18
- Views: 2227
From 3D part to 2D sketch, whatever the camera position
Created a 3D design. Now I would like to do the next steps: 1. View on top of the XZ plane; 2. Create a 2D sketch from the outer limits of what I have in my display (seems like Draft->Facebinder, but without selecting any 'face'; 3. Rotate +15° around the Z-axis; 4. Back to #2, Repeat until 165°; I ...
- Thu Mar 24, 2022 11:11 am
- Forum: Help on using FreeCAD
- Topic: Adapt downloaded stepfile fails
- Replies: 9
- Views: 1261
Re: Adapt downloaded stepfile fails
Thanks easyw-fc. I haven't used this function of the Part WB until today. I will check this
- Thu Mar 24, 2022 11:01 am
- Forum: Help on using FreeCAD
- Topic: Image on part-disappear in assembly
- Replies: 8
- Views: 1167
Re: Image on part-disappear in assembly
Interesting :idea: Trying to migrate the file I uploaded in 2019, using V0.19.24267 but it fails (migrating fails quite a lot with my older designs, unfortunately). Using A2Plus V0.4.54b I tried to import an assembly with images inside. Still the same effect, so from my pov: not solved. Also I found...
- Thu Mar 24, 2022 10:42 am
- Forum: Help on using FreeCAD
- Topic: Adapt downloaded stepfile fails
- Replies: 9
- Views: 1261
Re: Adapt downloaded stepfile fails
Thanks for your help chrisb and Shalmeneser. Sorry for the late anwer. Both possibilities are ok. But still; it is time consuming. I have the feeling this went easier 'in the past' (no offence obviously). But also 'in the past' it could happen that unexpected things happen if a stepfile was imperfect.
- Wed Mar 16, 2022 1:45 pm
- Forum: Help on using FreeCAD
- Topic: Adapt downloaded stepfile fails
- Replies: 9
- Views: 1261
Re: Adapt downloaded stepfile fails
Thanks chrisb, that wat actually very easy... Never get rid of the 'good-old' Part WB
Is this the reason why the Part Design WB 'fails'?CheckGeometry show lots of errors.
- Wed Mar 16, 2022 1:27 pm
- Forum: Help on using FreeCAD
- Topic: Adapt downloaded stepfile fails
- Replies: 9
- Views: 1261
Adapt downloaded stepfile fails
Downloaded what is in the attachement. For quite some time I tried to make a hole of Ø26mm in the center which also removes the threaded 'bolt' part. If someone succeeds; could you please tell how you did it? Because I tried anything twice (at least): 1. In Part Design, tried to migrate >>> Don't be...
- Fri Jan 21, 2022 10:31 am
- Forum: Assembly
- Topic: Major update from 0.16 to 0.19: Migrating problems
- Replies: 12
- Views: 3512
Re: Major update from 0.16 to 0.19: Migrating problems
I wrote this in the fipo: A2plus migration 1. Migrate in A2plus + save + reload: parts are converted, constraints are unchanged; 2. Repair treeview: constraints are now 'inside' the parts, but still 'grey'; 3. Activate Constraint + 'Highlight both constrained parts': the surfaces are displayed (appa...
- Fri Jan 21, 2022 10:25 am
- Forum: Assembly
- Topic: Major update from 0.16 to 0.19: Migrating problems
- Replies: 12
- Views: 3512
Re: Major update from 0.16 to 0.19: Migrating problems
For such a big jump in versions it is probably best to restart with a plain vanilla config; see https://wiki.freecadweb.org/Frequently_asked_questions#FreeCAD_was_running_normally.2C_and_suddenly_it_doesn.27t_start_anymore . I tried this already. Also I made a backup of the older config, expecting ...