Hello, I have the problem when running in parallel cfdOF with bluecfdcore. ERROR: Failed to post close command error 1726 ERROR: unable to tear down the job tree. exiting... I see that the solution is to uninstall/ reinstall bluefcd core but I am afraid to loose my set up with swak4Foam for example ...

Hello, The case is attached without the polyMesh folder (too big). The Mesh has been generated with Salome 9.5. The residual control < 10^(-6) for h. It converges in 1800 iterations https://zupimages.net/up/20/51/f3id.jpg In the controlDict file, the postreatment for wall power takes into account th...

Hello, Let me share my results on buoyantSimpleFoam solver. First I have mesh with Salome a 3 parts duct, 1000 mm with adiabatic wall for the mixing of the fluid, 2000 mm for the heat exchange zone (heat transfer coef) and 1000 mm more of adiabatic wall for outlet (I read this tip on cfdonline forum...

Bonjour,

On dirait que le multibody va arriver finalement

https://forum.freecadweb.org/viewtopic.php?f=19&t=52221

On verra.

Bon dimanche

To begin to confirm the simulation.
I have done an excel sheet with Colburn assumption in order to calculate the Nusselts number.
I obtain with the case parameters for temp outlet 443 K which is pretty close to the commercial software value.

Thank you thschrader for your answer, y+ value is dependant of what you want to calculate with your simulation. For drag and lift force (as describe in the video that you advise to me) the y+ value needs to be less than 5. It is also the case for energy exchange near walls. The tutorial that you wan...

Hello, Now it is ok for the convergence, thank you. The solver converges < 0.0001 I check y + for buoyantsimplefoam on the webb and it is very tricky. https://www.cfd-online.com/Forums/openfoam-solving/201559-buoyantsimplefoam-energy-balance-error.html I try to record the average temperatures from o...

Bonjour, Je m'en suis sorti avec draft + une Feuille de paramètres. Renseigner le point de rotation avec les données de la feuille (au passage on ne peut pas sélectionner de point de rotation directement dans draft, il faut accéder aux data pour le raccorder manuellement aux coordonnées de la feuill...

Hello, I am interested in using MBDyn with FreeCAD. I have try some years ago a similar module in Comsol. If I remember well, it has an extra cost in term of memory and time to be able to calculate the constraints in bodies with the dynamic module (elastic bodies). When computing only displacement, ...

Je suis en train de chercher pour une répétition dans l'atelier Assembly 3, on ne peut pas répéter une pièce comme dans part design ? Exemple, si j'ai une pièce avec une répétition de perçages, est il possible dans l'assemblage d'inclure une vis puis répéter cette répétition sur la vis ? Encore mieu...