Search found 49 matches
- Wed Aug 14, 2019 7:47 am
- Forum: TechDraw
- Topic: Circles detected as elipses...
- Replies: 7
- Views: 1348
Re: Circles detected as elipses...
@chrisb I used the FCCamera and aligned my view to the plane. Well, holes are still seen as elipses. I also tried development version Appimage and it suffers same symptoms. What is next? Holes were made as a circles in a sketch which i put directly on the plane and then I used Hole function of the p...
- Tue Aug 13, 2019 9:38 pm
- Forum: TechDraw
- Topic: Circles detected as elipses...
- Replies: 7
- Views: 1348
Circles detected as elipses...
Hey, I am trying to dimension this part in TechDraw workbench but with no sucess, because Techdraw keeps on detecting my holes as elipses. There are a couple holes that are angled, but that's only a few... Could anyone advise me on how to dimension this? I have NO clue because it looks like Techdraw...
- Sat Aug 10, 2019 9:52 pm
- Forum: Help on using FreeCAD
- Topic: TechDraw workbench - labeling parts of an assembly
- Replies: 19
- Views: 2378
Re: TechDraw workbench - labeling parts of an assembly
Thank you for the AppImages. I tried v0.19 and TechDraw is too bugy to use for production... Looks like bugs are multiplying like musrooms after the rain. Maybee stop the advancment untill current bugs are fixed?
- Sat Aug 10, 2019 8:43 pm
- Forum: TechDraw
- Topic: Techdraw - no center snap points are shown
- Replies: 25
- Views: 10942
Re: Techdraw - no center snap points are shown
I am trying to dimension a rod in a Techdraw with a bunch of screw holes, but i can't, because there is no snap points in the middle of the circles. Why are they instead drawn at the side of the circles? Also there are none drawn for hidden edges (circles or straight lines)! I see 1 circle in the s...
- Sat Aug 10, 2019 8:38 pm
- Forum: Help on using FreeCAD
- Topic: TechDraw workbench - labeling parts of an assembly
- Replies: 19
- Views: 2378
Re: TechDraw workbench - labeling parts of an assembly
Hello! I know, but installing Freecad like that breaks your distribution. No, make a lokal build and do not install it. You can start FreeCAD from the bin folder. And if you want to delete the built, just delete it. Greetings user I tried and failed as Debian lacks libraries needed to compile. I wo...
- Sat Aug 10, 2019 8:36 pm
- Forum: TechDraw
- Topic: Created section, can't seem to move the section line.
- Replies: 3
- Views: 770
Re: Created section, can't seem to move the section line.
I have the same problem. On some pieces it works but on others it won't work. For example I can set section origin coordinates and when I refresh using F5 everything goes back to the way it was. Looks like something is resetting the values... (v18)
- Mon Aug 05, 2019 12:13 pm
- Forum: Help on using FreeCAD
- Topic: Debug Thread out of range
- Replies: 6
- Views: 2166
Re: Debug Thread out of range
This does not occur in 0.18, but it occurs again in 0.19 development appimage. I tested this for a same project opened in both versions.
- Mon Aug 05, 2019 6:33 am
- Forum: TechDraw
- Topic: Techdraw - no center snap points are shown
- Replies: 25
- Views: 10942
- Mon Aug 05, 2019 6:26 am
- Forum: TechDraw
- Topic: Techdraw - no center snap points are shown
- Replies: 25
- Views: 10942
Techdraw - no center snap points are shown
I am trying to dimension a rod in a Techdraw with a bunch of screw holes, but i can't, because there is no snap points in the middle of the circles. Why are they instead drawn at the side of the circles? Also there are none drawn for hidden edges (circles or straight lines)! How to overcome this iss...
- Fri Aug 02, 2019 4:38 am
- Forum: TechDraw
- Topic: Techdraw WB - some weird lines are shown
- Replies: 6
- Views: 1300
Re: Techdraw WB - some weird lines are shown
Did you have transparency turned ON? I think it might be correlated to this...dcapeletti wrote: ↑Thu Aug 01, 2019 11:12 pm Hi, something similar happens to what happened to me. A few days ago I published it. https://forum.freecadweb.org/viewtopic.php?f=35&t=38118