Search found 150 matches

Go to advanced search

by falviani
Wed Jun 09, 2021 1:52 am
Forum: Path/CAM
Topic: All pockets have max depth=0 - help please!
Replies: 5
Views: 518

Re: All pockets have max depth=0 - help please!

Thanks for the info - I"ll remember that in my next design!!

Frank
by falviani
Tue Jun 08, 2021 8:30 pm
Forum: Path/CAM
Topic: All pockets have max depth=0 - help please!
Replies: 5
Views: 518

Re: All pockets have max depth=0 - help please!

Gene, Thanks for the advice. After a bit of fiddling to replace the end mill with one slightly smaller, and using the 'outline' checkbox, I was able to generate the toolpaths I was expecting. I'd like to avoid mistakes I made in doing this one. Could you point out what you consider missing dimension...
by falviani
Tue Jun 08, 2021 5:51 pm
Forum: Path/CAM
Topic: All pockets have max depth=0 - help please!
Replies: 5
Views: 518

All pockets have max depth=0 - help please!

Hi, My setup is as follows (built from Git): OS: Windows 10 Version 2009 Word size of FreeCAD: 64-bit Version: 0.20.25025 (Git) Build type: Release Branch: master Hash: fb8b21ec43dca706a4aa2d63d59a4fb79f050369 Python version: 3.8.6+ Qt version: 5.15.2 Coin version: 4.0.1 OCC version: 7.5.0 Locale: E...
by falviani
Sat Apr 24, 2021 8:10 pm
Forum: Path/CAM
Topic: Post processor possible bug?
Replies: 7
Views: 410

Re: Post processor possible bug?

Chris B -
Comparing your 'about' info with mine, I notice your Qt version is quite a bit newer than mine, yet I did a pull almost immediately preceding this test. What could be the cause? Shouldn't I have the same version?

Frank
by falviani
Sat Apr 24, 2021 8:07 pm
Forum: Path/CAM
Topic: Post processor possible bug?
Replies: 7
Views: 410

Re: Post processor possible bug?

Hi,

Yes, I changed this in my preferences, and the changes were not reflected in gcode generated after that. Chrisb says they worked for him, so I don't know what's up; this instance was compiled from the master.

-Frank
by falviani
Thu Apr 22, 2021 3:37 pm
Forum: Path/CAM
Topic: Post processor possible bug?
Replies: 7
Views: 410

Post processor possible bug?

Hi, Here is my setup: OS: Windows 10 Version 2009 Word size of FreeCAD: 64-bit Version: 0.20.24756 (Git) Build type: Release Branch: master Hash: 2c072c70929bb359853bfa09a5b34977c8a0670b Python version: 3.8.6+ Qt version: 5.15.2 Coin version: 4.0.1 OCC version: 7.5.0 Locale: English/United States (e...
by falviani
Thu Apr 22, 2021 2:12 am
Forum: Path/CAM
Topic: OpenCAMLib for Master (0.20)
Replies: 3
Views: 277

Re: OpenCAMLib for Master (0.20)

Thanks very much for your assistance.

Frank
by falviani
Wed Apr 21, 2021 6:44 pm
Forum: Path/CAM
Topic: OpenCAMLib for Master (0.20)
Replies: 3
Views: 277

OpenCAMLib for Master (0.20)

Hi, When I finally got a good build of master (a separate saga :lol: ) I saw that openCAMlib had been built with an earlier Python version (3.6 vs current 3.8). Is anyone building a version that's compatible with 0.20 (using Python 3.8), and if so how could I get a copy? Thanks in advance, Frank Alv...
by falviani
Fri Apr 16, 2021 6:42 pm
Forum: Install / Compile
Topic: Python errors after building from master
Replies: 22
Views: 823

Re: Python errors after building from master

I'll be pleased to continue here in order to help others. :) Just let me know what I can do to help.

[Totally off topic: How do I edit the title so I can indicate the topic is actually solved? ]

Frank
by falviani
Fri Apr 16, 2021 5:27 pm
Forum: Install / Compile
Topic: Python errors after building from master
Replies: 22
Views: 823

Re: {SOLVED] Python errors after building from master

Hi SGrogan, That did it - it now completes opening! In fact, until now I've been unable to use the draft workbench for resizing - I think there was an incompability with my video drivers that now seems to be fixed. The next step for you real developers is to figure out the 1-line fix :D that will ta...

Go to advanced search