Search found 250 matches

by wieszak17
Tue Mar 12, 2024 5:17 pm
Forum: Help on using FreeCAD
Topic: Filleting only one edge?
Replies: 10
Views: 830

Re: Filleting only one edge?

maybe remove vertical fillets, do other fillets and add vertical ones using pocket?
by wieszak17
Tue Mar 12, 2024 5:04 pm
Forum: Help on using FreeCAD
Topic: Ways to create chamfer transitions over rounded corners?
Replies: 15
Views: 1274

Re: Ways to create chamfer transitions over rounded corners?

Maybe another way?
abcd.FCStd
(84.07 KiB) Downloaded 4 times
abcd.png
abcd.png (25.14 KiB) Viewed 219 times
by wieszak17
Sat Jan 06, 2024 1:47 pm
Forum: Part Design module development
Topic: Combine yellow and red buttons into one tool?
Replies: 48
Views: 154916

Re: Combine yellow and red buttons into one tool?

I'm strongly against combined buttons. They offer nearly nothing useful (all three reasons in czinehuba's post could told as 'lets have some room for possible future features') only burden to find where the heck author hidden that feature i want to use? And why here not there? It could be as an opti...
by wieszak17
Wed Jan 03, 2024 5:06 pm
Forum: Open discussion
Topic: Feature request: Hide backup files.
Replies: 27
Views: 8313

Re: Feature request: Names for backup files

Being able to specify a destination for backup files would be another way of preventing pollution of the main project directory with backups. +1 : The only valid answer till yet and anyway the best solution for this issue. Its not that great - consider people who wants to have few files with same n...
by wieszak17
Tue Dec 26, 2023 4:07 pm
Forum: Help on using FreeCAD
Topic: Padding up is fine, padding down creates multiple solids. Why?
Replies: 6
Views: 883

Re: Padding up is fine, padding down creates multiple solids. Why?

First do Pocket with Sketch018, then Pad holders - how FC should know "please pocket everything but this holders? :D
Pocket after padding holders cuts them from cover. You can add holes in Sketch018 to not cut them, but more natural and simpler is pocket first.
by wieszak17
Tue Dec 26, 2023 2:26 pm
Forum: Help on using FreeCAD
Topic: Padding up is fine, padding down creates multiple solids. Why?
Replies: 6
Views: 883

Re: Padding up is fine, padding down creates multiple solids. Why?

Your cover is 3mm height (cover-base + Pad009). Thickness as you realized dug it also 3mm and should only left a ring shaped object, but thickness didn't remove coplanar faces. Idea to use pocket instead is good one as Thickness here will always do strange thing with fillets - i'm a bit surprised th...
by wieszak17
Tue Dec 26, 2023 12:24 pm
Forum: Help on using FreeCAD
Topic: Padding up is fine, padding down creates multiple solids. Why?
Replies: 6
Views: 883

Re: Padding up is fine, padding down creates multiple solids. Why?

Sketch17 is not on face of solid as probably you are assuming. After Thickness, there is no face at plane where sketch17 is, face is 1mm above plane, so holders pointing down are build "in the air". Also, cover has 0mm thickness... Try setting transparency to 90% and look from side, it cou...
by wieszak17
Mon Dec 25, 2023 9:47 am
Forum: Help on using FreeCAD
Topic: Remove artifact in model
Replies: 5
Views: 628

Re: Remove artifact in model

There are very small faces in your model originating from well, bad design. Probably better to redo that model in different way - you should use references to previous sketches more (rather avoid referencing edges of faces-> TNP) than adding not round dimensions. Also if possible try avoid adding fe...