Thanks a lot for all your replies, chrisb, your solution is something I stumbled about but as it was not an adaptive pathway around I was not this convinced and asked myself if there isn't another solution. Attached is another version of the setup with adaptive path to answer mlamperts question what...

You could use the Boundary dressup to exclude the area of the clamps - make sure you set your Heights correctly to clear the clamps. Hey, yes that was my first thought when I found this by searching the forum for adaptive clearing. But adaptive clearing does not work together with Boundary dressup....

Hi RatonLaveur, Painters tape and superglue. NYC CNC the Youtube channel has great tips on work-holding with glue. Alternatively when using wood, you can take a page off Martin's book down at Wintergatan's series on building the Marble Machine X: screw your workpieces down! Does that help? I had the...

Hi there, I have some stocks I like to round the corners with adaptive clearing. My Tool is 16mm cutting height and the stock is 30mm so I need to do it from 2 sides. For this I've made a holder to have the same position even if I turn the stock around. Here is the setup why I can't use the profilin...

I tried to create a simple copy of the whole Part. It sort of worked, i.e. it looks ok, but Check geometry shows lots of errors and Path doesn't recognize any of the solids either. Thank your for already trying this, I didn't find the time yesterday, is it possible that the errors arise from the de...

Thanks all for the great support, I checked out the latest master and compiled it. OS: Ubuntu 18.04.3 LTS (ubuntu:GNOME/ubuntu) Word size of OS: 64-bit Word size of FreeCAD: 64-bit Version: 0.19.18779 (Git) Build type: Unknown Branch: master Hash: cbe161b4e464a49e8d16fd9a1bf3b5e8d72de24d Python vers...

chrisb wrote: ↑Sun Nov 17, 2019 9:12 am Can you change them to relative?

Would like to also for my own usage, but I don't find an option to change this, can you point me the direction I have to look for to make them relative ?

Hey chrisb,

thx for your fast response, the file to open is fb_asm.FCStd. I fear it was lazyness that the backup files are in the zip ;)

Hi there, I've started to work with assemblies and used the assembly 4 workbench. I also want to mill the Parts I created in the Part Design WB. But when I switch to the single Parts and click the Create Job button I get a Dialog to select the Parts to create the Job for and I can't select the Body....