Search found 8868 matches

by drmacro
Thu Mar 28, 2024 8:57 pm
Forum: Help on using FreeCAD
Topic: still struggling to understand the modeling process of freecad
Replies: 5
Views: 125

Re: still struggling to understand the modeling process of freecad

Two minutes is about right. ;)

Two sketches, two revolves, and a Polar pattern.
by drmacro
Thu Mar 28, 2024 7:20 pm
Forum: Help on using FreeCAD
Topic: Snapping different bodies together
Replies: 13
Views: 492

Re: Snapping different bodies together

We have been making this far too complicated. Use the Draft workbench Move tool, make sure snapping is active with snap types midpoint and snap angle selected. Great method and thanks for the info. Only problem is that the shapes are not lined up. Have nay clues on how to lign them up as the ones i...
by drmacro
Thu Mar 28, 2024 5:40 pm
Forum: Help on using FreeCAD
Topic: Snapping different bodies together
Replies: 13
Views: 492

Re: Snapping different bodies together

We have been making this far too complicated.

Use the Draft workbench Move tool, make sure snapping is active with snap types midpoint and snap angle selected.
by drmacro
Thu Mar 28, 2024 12:33 pm
Forum: Help on using FreeCAD
Topic: Fully constrained sketch won't pad
Replies: 5
Views: 154

Re: Fully constrained sketch won't pad

There is a bit of misconception about the state "fully constrained". It really means all DOF's have a constraint applied and there are no redundant, over constraints, etc. situations. Fully constrained means all DOF (degrees of freedom) have been addressed. So, the vertexes in question are...
by drmacro
Thu Mar 28, 2024 10:31 am
Forum: Help on using FreeCAD
Topic: Snapping different bodies together
Replies: 13
Views: 492

Re: Snapping different bodies together

There are a few ways to do it. Some already mentioned.

The Manipulator workbench is convenient.

The Edit menu>Alignment works, but is confusing at first.
by drmacro
Thu Mar 28, 2024 10:27 am
Forum: Help on using FreeCAD
Topic: Pocket breaks body (faces glitch away and distort)
Replies: 13
Views: 446

Re: Pocket breaks body (faces glitch away and distort)

freedman wrote: Thu Mar 28, 2024 4:18 am Strange, in the case I don't see Support on:
master-front
Sketch017
Sketch018

Anyone else see the same?
Thanks
Yes, I did note that.

It could be that having no reference to the Body Origin had something to do with needing a complete recompute (just a guess...).
by drmacro
Wed Mar 27, 2024 10:34 pm
Forum: Help on using FreeCAD
Topic: Pocket breaks body (faces glitch away and distort)
Replies: 13
Views: 446

Re: Pocket breaks body (faces glitch away and distort)

Same here a full recompute and viola.
by drmacro
Wed Mar 27, 2024 9:37 pm
Forum: Open discussion
Topic: auto things making life "easier"
Replies: 10
Views: 580

Re: auto things making life "easier"

Preference packs are quite powerful and can be created by the user.

They aren't well known or understood, so haven't found many users.
by drmacro
Wed Mar 27, 2024 9:33 pm
Forum: Open discussion
Topic: Sketcher: Snapping to external edges automatically
Replies: 9
Views: 315

Re: Sketcher: Snapping to external edges automatically

Snapping that worked well in sketcher would be a good thing.

External geometry should be able to be used as real geometry, you shouldn't have to trace over it. And, the code already exists...
by drmacro
Wed Mar 27, 2024 9:27 pm
Forum: Help on using FreeCAD
Topic: How to convert to .STP file
Replies: 6
Views: 223

Re: How to convert to .STP file

Yes, the .STL loads fine. I can measure it, etc, but no functionality is available associated with it. Like convert to solid I guess I stumped this illustrious group. Not impressed people. It's ok, I'm not impressed by your attitude. :mrgreen: A mesh is typically not a source for a step file which ...