Search found 687 matches
- Fri Jan 08, 2021 9:12 pm
- Forum: Forum po polsku
- Topic: Wygląda na to, że FreeCAD jest używany w polskiej edukacji
- Replies: 17
- Views: 18462
Re: Wygląda na to, że FreeCAD jest używany w polskiej edukacji
W trakcie zajęć jeden z uczniów technikum informatycznego przy pomocy oprogramowania FreeCad wykonał model trójwymiarowy części urządzenia. Następnie wydrukował element na drukarce 3D. Uczniowie placówki byli pod ogromnym wrażeniem. W rozmowie z Radiem Kielce wspólnie podkreślali, że dzięki nowym t...
- Thu Jan 07, 2021 8:00 pm
- Forum: Forum po polsku
- Topic: Napęd teleskopu Dobsona
- Replies: 31
- Views: 25207
Re: Napęd teleskopu Dobsona
Czy teraz na odwrót, za cenę dokładności, nie będzie problemu z osiągnięciem satysfakcjonującej prędkości przy jakiś większych obrotach? No właśnie, dopiero po zbudowaniu prototypu doszło do mnie, że przegiąłem z przełożeniem. Do tej pory miałem przełożenie ok. 60 w poziomie i 40 w pionie. Teraz ja...
- Wed Jan 06, 2021 6:47 pm
- Forum: Open discussion
- Topic: part workbench?
- Replies: 8
- Views: 1126
- Wed Jan 06, 2021 10:39 am
- Forum: Users Showcase
- Topic: My FreeCAD concept art [Metal Bug Projects]
- Replies: 5
- Views: 3649
Re: My FreeCAD concept art [Metal Bug Projects]
Consider reposting one of them on https://www.reddit.com/r/FreeCAD/ There are a lot of people searching for such tutorials.
- Sun Jan 03, 2021 5:55 pm
- Forum: Users Showcase
- Topic: High ratio (354:1) planetary compound and telescope drive (3D-printed)
- Replies: 11
- Views: 8783
Re: High ratio (1:354) planetary compound and telescope drive (3D-printed)
Am I right that the output gear is only guided by the 3 planetary gears ? Yes. This is not perfect from mechanical POV ("real", steel planetary gearings don't work that way), but it seems to be good enough for 3D-printing. EDIT: After some testing I'm thinking about single fixed ring desi...
- Sun Jan 03, 2021 4:38 pm
- Forum: Users Showcase
- Topic: High ratio (354:1) planetary compound and telescope drive (3D-printed)
- Replies: 11
- Views: 8783
Re: High ratio (1:354) planetary compound and telescope drive (3D-printed)
Awesome work! Interesting how the ring gear has an external gearing. Did you have inspirations for this choice, I have not seen that before. Why did you go with the different modules on the same wheel? Thank you for kind words! Since planet gears are shared, and ring gears are different, I have to ...
- Sun Jan 03, 2021 2:18 pm
- Forum: Forum po polsku
- Topic: Napęd teleskopu Dobsona
- Replies: 31
- Views: 25207
Re: Napęd teleskopu Dobsona
Powiązana z tematem przekładnia planetarna 354:1 https://youtu.be/3EOHyrEP4kE https://github.com/kwahoo2/Mortargear Chciałem uzyskać bardzo duże przełożenie i najpierw próbowałem zrobić przekładnię harmoniczną. Niestety eksperymenty z przekładnią harmoniczną DIY dały rozczarowujące wyniki. Drukowana...
- Sun Jan 03, 2021 2:15 pm
- Forum: Users Showcase
- Topic: High ratio (354:1) planetary compound and telescope drive (3D-printed)
- Replies: 11
- Views: 8783
High ratio (354:1) planetary compound and telescope drive (3D-printed)
Hi, I was searching for high ratio gearing to use in my DIY telescope drive . The first idea was a strain wave gearing, but 3D-printed wave is not reliable. I could use timing belt, but then gearing is noticeably bigger, and the belt has to much flexibility. Finally, I created this: 3D-printed plane...
- Sun Dec 27, 2020 11:09 am
- Forum: Assembly
- Topic: Help With 3D Constrained Assembly?
- Replies: 6
- Views: 1281
Re: Help With 3D Constrained Assembly?
AFAIK you have to use Assembly3 for this. Use PointsConcident constraints at the end of every link. You will able to move assembly by hand using Assembly3 move tool.
- Sat Dec 26, 2020 9:43 pm
- Forum: Forum po polsku
- Topic: 3d surface PathWB
- Replies: 1
- Views: 817
Re: 3d surface PathWB
Dzięki. Dawno nie zaglądałem do Path, ale widzę(już po samym tytule postu:), że dzięki opencamlib jest upragniona obsługa powierzchni 3d. Teraz tylko zmotywować się do ruszenia z projektem frezarki CNC...