[SOLVED] Bug #2845: [Part] Part fusion fails when trying to fusion 10 offset parts into 1
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
[SOLVED] Bug #2845: [Part] Part fusion fails when trying to fusion 10 offset parts into 1
Please continue discussing issue #2845 below:
Last edited by Kunda1 on Fri Oct 19, 2018 3:04 pm, edited 1 time in total.
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: Bug #2845: [Part] Part fusion fails when trying to fusion 10 offset parts into 1
Anyone care to weigh in on this ?
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
-
DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: Bug #2845: [Part] Part fusion fails when trying to fusion 10 offset parts into 1
No problem here:
OS: Windows 8
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.14495 (Git)
Build type: Release
Branch: master
Hash: c717d1121d888fe6cfbd8971b5f59311a34b37bc
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: Russian/RussianFederation (ru_RU)
(fusion successful, bopcheck of result passed)
I'd recommend adding a cylinder in the center, where all the interesting intersection stuff is happening. Then cut each blade with the cylinder, then fuse the cut blades to the cylinder. This should eliminate the intersection complexity at the center, and improve the odds of success.
OS: Windows 8
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.14495 (Git)
Build type: Release
Branch: master
Hash: c717d1121d888fe6cfbd8971b5f59311a34b37bc
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: Russian/RussianFederation (ru_RU)
(fusion successful, bopcheck of result passed)
I'd recommend adding a cylinder in the center, where all the interesting intersection stuff is happening. Then cut each blade with the cylinder, then fuse the cut blades to the cylinder. This should eliminate the intersection complexity at the center, and improve the odds of success.
Re: Bug #2845: [Part] Part fusion fails when trying to fusion 10 offset parts into 1
Not reproducable on MacOS with rather current 0.18 either. I closed the ticket.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Bug #2845: [Part] Part fusion fails when trying to fusion 10 offset parts into 1
Thanks @chrisb!
Marked this thread [SOLVED].
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs