The Travis test failure thread

abdullah · Post by **abdullah** » Sun Jun 09, 2019 12:41 pm

Hi, one thread for reporting test failures

So as the title says we have a failing tests in the wild:

======================================================================
ERROR: test_tetra10_yml (femtest.testmesh.TestMeshEleTetra10)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\femtest\testmesh.py"
, line 474, in test_tetra10_yml
    write(self.femmesh, outfile)
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\feminout\importYamlJ
sonMesh.py", line 203, in write
    mesh_data = importToolsFem.make_dict_from_femmesh(fem_mesh)
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\feminout\importTools
Fem.py", line 288, in make_dict_from_femmesh
    for e in femmesh.Edges:
AttributeError: 'str' object has no attribute 'Edges'
======================================================================
FAIL: test_1_static_analysis (femtest.testccxtools.TestCcxTools)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\femtest\testccxtools
.py", line 220, in test_1_static_analysis
    "ccxtools write_inp_file test failed.\n{}".format(ret)
AssertionError: 'Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\\Fem\
\femtest\\testfiles\\ccx\\cube_static.inp to C:\\Users\\travis\\AppData\\Local\\
Temp\\FEM_unittests\\FEM_ccx_static\\Mesh.inp failed!\n--- \n+++ \n@@ -590,0 +59
1,5 @@\n+** outputs --> dat file\n+** reaction forces for Constraint fixed\n+*NO
DE PRINT, NSET=FemConstraintFixed, TOTALS=ONLY\n+RF\n+\n' is not false : ccxtool
s write_inp_file test failed.
Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\Fem\femtest\testfiles\
ccx\cube_static.inp to C:\Users\travis\AppData\Local\Temp\FEM_unittests\FEM_ccx_
static\Mesh.inp failed!
---
+++
@@ -590,0 +591,5 @@
+** outputs --> dat file
+** reaction forces for Constraint fixed
+*NODE PRINT, NSET=FemConstraintFixed, TOTALS=ONLY
+RF
+
======================================================================
FAIL: test_2_static_multiple_material (femtest.testccxtools.TestCcxTools)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\femtest\testccxtools
.py", line 408, in test_2_static_multiple_material
    "ccxtools write_inp_file test failed.\n{}".format(ret)
AssertionError: 'Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\\Fem\
\femtest\\testfiles\\ccx\\multimat.inp to C:\\Users\\travis\\AppData\\Local\\Tem
p\\FEM_unittests\\FEM_ccx_multimat/Mesh.inp failed!\n--- \n+++ \n@@ -1282,0 +128
3,5 @@\n+** outputs --> dat file\n+** reaction forces for Constraint fixed\n+*NO
DE PRINT, NSET=ConstraintFixed, TOTALS=ONLY\n+RF\n+\n' is not false : ccxtools w
rite_inp_file test failed.
Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\Fem\femtest\testfiles\
ccx\multimat.inp to C:\Users\travis\AppData\Local\Temp\FEM_unittests\FEM_ccx_mul
timat/Mesh.inp failed!
---
+++
@@ -1282,0 +1283,5 @@
+** outputs --> dat file
+** reaction forces for Constraint fixed
+*NODE PRINT, NSET=ConstraintFixed, TOTALS=ONLY
+RF
+
======================================================================
FAIL: test_3_freq_analysis (femtest.testccxtools.TestCcxTools)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\femtest\testccxtools
.py", line 524, in test_3_freq_analysis
    "ccxtools write_inp_file test failed.\n{}".format(ret)
AssertionError: 'Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\\Fem\
\femtest\\testfiles\\ccx\\cube_frequency.inp to C:\\Users\\travis\\AppData\\Loca
l\\Temp\\FEM_unittests\\FEM_ccx_frequency\\Mesh.inp failed!\n--- \n+++ \n@@ -464
,0 +465,2 @@\n+** outputs --> dat file\n+** reaction forces for Constraint fixed
\n' is not false : ccxtools write_inp_file test failed.
Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\Fem\femtest\testfiles\
ccx\cube_frequency.inp to C:\Users\travis\AppData\Local\Temp\FEM_unittests\FEM_c
cx_frequency\Mesh.inp failed!
---
+++
@@ -464,0 +465,2 @@
+** outputs --> dat file
+** reaction forces for Constraint fixed
======================================================================
FAIL: test_4_thermomech_analysis (femtest.testccxtools.TestCcxTools)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\femtest\testccxtools
.py", line 756, in test_4_thermomech_analysis
    "ccxtools write_inp_file test failed.\n{}".format(ret)
AssertionError: 'Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\\Fem\
\femtest\\testfiles\\ccx\\spine_thermomech.inp to C:\\Users\\travis\\AppData\\Lo
cal\\Temp\\FEM_unittests\\FEM_ccx_thermomech\\Mesh.inp failed!\n--- \n+++ \n@@ -
199,0 +200,5 @@\n+** outputs --> dat file\n+** reaction forces for Constraint fi
xed\n+*NODE PRINT, NSET=FemConstraintFixed, TOTALS=ONLY\n+RF\n+\n' is not false
: ccxtools write_inp_file test failed.
Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\Fem\femtest\testfiles\
ccx\spine_thermomech.inp to C:\Users\travis\AppData\Local\Temp\FEM_unittests\FEM
_ccx_thermomech\Mesh.inp failed!
---
+++
@@ -199,0 +200,5 @@
+** outputs --> dat file
+** reaction forces for Constraint fixed
+*NODE PRINT, NSET=FemConstraintFixed, TOTALS=ONLY
+RF
+
======================================================================
FAIL: test_solver_framework (femtest.testsolverframework.TestSolverFrameWork)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\femtest\testsolverfr
amework.py", line 178, in test_solver_framework
    self.assertFalse(ret, "ccxtools write_inp_file test failed.\n{}".format(ret)
)
AssertionError: 'Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\\Fem\
\femtest\\testfiles\\ccx\\cube_static.inp to C:\\Users\\travis\\AppData\\Local\\
Temp\\FEM_unittests\\FEM_solverframework\\Mesh.inp failed!\n--- \n+++ \n@@ -590,
0 +591,5 @@\n+** outputs --> dat file\n+** reaction forces for Constraint fixed\
n+*NODE PRINT, NSET=FemConstraintFixed, TOTALS=ONLY\n+RF\n+\n' is not false : cc
xtools write_inp_file test failed.
Comparing C:/Users/travis/build/FreeCAD/FreeCAD/build/Mod\Fem\femtest\testfiles\
ccx\cube_static.inp to C:\Users\travis\AppData\Local\Temp\FEM_unittests\FEM_solv
erframework\Mesh.inp failed!
---
+++
@@ -590,0 +591,5 @@
+** outputs --> dat file
+** reaction forces for Constraint fixed
+*NODE PRINT, NSET=FemConstraintFixed, TOTALS=ONLY
+RF
+
----------------------------------------------------------------------
Ran 334 tests in 32.523s
FAILED (failures=5, errors=1)

As they appear to be FEM, I ping the FEM master:

bernd wrote: ping

Post by **wandererfan** » Sun Jun 09, 2019 1:18 pm

Cross post re potentially missing libraries for QtXmlPatterns on Travis Win builds.

abdullah · Post by **abdullah** » Mon Jun 17, 2019 12:01 pm

cross-post.

abdullah · Post by **abdullah** » Sat Jul 06, 2019 11:45 am

We are having a new issue with test failure.

https://github.com/FreeCAD/FreeCAD/commits/master

Failure is:

Code: Select all

======================================================================
FAIL: test_1_static_analysis (femtest.testccxtools.TestCcxTools)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\femtest\testccxtools
.py", line 268, in test_1_static_analysis
    "Invalid results read from .frd file"
AssertionError: True is not false : Invalid results read from .frd file
----------------------------------------------------------------------
Ran 336 tests in 34.143s
FAILED (failures=1)

Full log:
https://travis-ci.org/FreeCAD/FreeCAD/jobs/554842187

I guess this one goes to bern...

bernd wrote:... ping ...

Russ4262 · Post by **Russ4262** » Wed Jul 10, 2019 2:43 pm

Starting prior to PR #2330, or there abouts, Travis CI is failing due to FEM related test.

Code: Select all

======================================================================
FAIL: test_1_static_analysis (femtest.testccxtools.TestCcxTools)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "C:\Users\travis\build\FreeCAD\FreeCAD\build\Mod\Fem\femtest\testccxtools
.py", line 268, in test_1_static_analysis
    "Invalid results read from .frd file"
AssertionError: True is not false : Invalid results read from .frd file
----------------------------------------------------------------------

Russ

Post by **bernd** » Wed Jul 10, 2019 7:19 pm

My one ... I missed it. As soon as I am on a computer I will try fix it. For me on linux test run fine must be on windows ...

Post by **bernd** » Wed Jul 10, 2019 8:09 pm

git commit b51bf9a

mlampert · Post by **mlampert** » Wed Jul 10, 2019 9:19 pm

Does the trick for me - thanks.

apeltauer · Post by **apeltauer** » Thu Jul 11, 2019 5:25 am

also works again on windows 10...
thanks...

The Travis test failure thread

The Travis test failure thread

Re: The Travis test failure thread

Re: The Travis test failure thread

Re: The Travis test failure thread

Re: The Travis test failure thread

Re: The Travis test failure thread

Re: The Travis test failure thread

Re: The Travis test failure thread

Re: The Travis test failure thread