Hallo Zusammen,
Ihr wisst ja.... mal wieder eine Dummy Frage:
.... was hab ich nicht berücksichtigt, dass mir die Fehlermeldung: "part has multiple solids" angezeigt wird?
Ich hänge mal die Datei dran. Vermutl. nur was kleines und ich bin um jede Hilfe dankbar.
VG
Tobi
Part has multiple solids
-
- Posts: 67
- Joined: Wed Oct 30, 2019 5:05 am
Part has multiple solids
- Attachments
-
- Arbeitstisch.FCStd
- (32.03 KiB) Downloaded 23 times
-
- multiple solids 2.JPG (44.53 KiB) Viewed 882 times
-
- Multiple Solids.JPG (28.32 KiB) Viewed 882 times
- Shalmeneser
- Veteran
- Posts: 9560
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Part has multiple solids
Pad : reverse = true
If you pad with outside direction, there are 2 bodies (just touching themselves along edges).
If you pad with outside direction, there are 2 bodies (just touching themselves along edges).
-
- Posts: 67
- Joined: Wed Oct 30, 2019 5:05 am
Re: Part has multiple solids
Top!
thanks!
VG
Tobi
thanks!
VG
Tobi
- Shalmeneser
- Veteran
- Posts: 9560
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Part has multiple solids
(In Help forum, use English. Deutsch forum is top-level.)
1) Do not sketch on face. You will meet Topological_naming_problem
2) Lines on the faces are just cosmetics ones. Try Refine=true in the ComboView Data of the last operation. This body is just ONE piece.
1) Do not sketch on face. You will meet Topological_naming_problem
2) Lines on the faces are just cosmetics ones. Try Refine=true in the ComboView Data of the last operation. This body is just ONE piece.
- Attachments
-
- Capture.PNG (6.48 KiB) Viewed 722 times
- Shalmeneser
- Veteran
- Posts: 9560
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Part has multiple solids
More logically :
1) 1 big rectangle
2) 2 triangle holes (Sketcher_External + Sketcher_ToggleConstruction)
1) 1 big rectangle
2) 2 triangle holes (Sketcher_External + Sketcher_ToggleConstruction)
- Attachments
-
- Arbeitstisch_SHALM.FCStd
- (25.5 KiB) Downloaded 18 times
Re: Part has multiple solids
Verschoben ins deutsche Forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.