... konische Helix mit negativem Winkel (ist das in FC.19 neu? - bislang hatte ich sowas noch nicht auf dem Schirm)
und Verschnitt zwischen Konus und Spiralextrusion dürften geometrisch/mathematisch äquivalent sein - letzteres ist nur komplizierter.
Deshalb habe ich es auch nochmal probiert - man lernt nie aus - insbesondere aus Fehlern.
Spirale Dreidimensional / 3d Spiral
Re: Spirale Dreidimensional / 3d Spiral
- Attachments
-
- HelixForPipe_4.FCStd
- FC.19.3
- (291.28 KiB) Downloaded 17 times
-
- HelixForPipe_3.FCStd
- FC.19.3
- (277.5 KiB) Downloaded 17 times
Last edited by hammax on Fri Jan 21, 2022 12:22 pm, edited 1 time in total.
Re: Spirale Dreidimensional / 3d Spiral
Das ist tatsächlich neu in 0.19. Sonst muss man am anderen Ende anfangen.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Spirale Dreidimensional / 3d Spiral
... d.h. man kriegt jetzt auch Helices in einem Schwung zustande, die so aussehen:
(Matratzenfedern!!!)
(Matratzenfedern!!!)
- Attachments
-
- HelixForPipe_5.FCStd
- FC.19.3
- (66.38 KiB) Downloaded 20 times
Re: Spirale Dreidimensional / 3d Spiral
Das war mir auch aufgefallen (durch eine Fehleingabe der Parameter). Allerdings zeigt CheckGeomertie Selbstüberschneidungen an. Das könnte in späteren Schritte Probleme machen.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.