FreeCad Path problem

Here's the place for discussion related to CAM/CNC and the development of the Path module.
Arnold
Posts: 24
Joined: Sat Nov 18, 2017 10:27 am

FreeCad Path problem

Postby Arnold » Sun Apr 14, 2019 5:15 pm

Hello,

I m not able to use path on this design. I can not do Camber and Profile Face get problem. Who can help that i can mill this.

Thanks
Attachments
WerkzeugHalter-V2.FCStd
(140.56 KiB) Downloaded 13 times
chrisb
Posts: 14562
Joined: Tue Mar 17, 2015 9:14 am

Re: FreeCad Path problem

Postby chrisb » Sun Apr 14, 2019 6:00 pm

Moved to Path forum.
User avatar
sliptonic
Posts: 1390
Joined: Tue Oct 25, 2011 10:46 pm

Re: FreeCad Path problem

Postby sliptonic » Sun Apr 14, 2019 7:24 pm

You need to give us a bit more to go on. What are you trying to achieve?
What results are you seeing that aren't right?
chrisb
Posts: 14562
Joined: Tue Mar 17, 2015 9:14 am

Re: FreeCad Path problem

Postby chrisb » Sun Apr 14, 2019 7:41 pm

Arnold wrote:
Sun Apr 14, 2019 5:15 pm
I can not do Camber and Profile Face get problem
With "Camber" you mean "Chamfer"? As mlampert pointed out in the other topic where you posted, there is no chamfer path operation yet so it is calle deburr. You can apply it to the unchamfered hole, the chamfering is simply done by the tool.
Arnold
Posts: 24
Joined: Sat Nov 18, 2017 10:27 am

Re: FreeCad Path problem

Postby Arnold » Mon Apr 15, 2019 6:59 pm

Ok,

You mean. I just draw a normal hole and in path i choose it.

I tried deburr after switching on experimental. But i still can not do this. Can you give me a small drawing with a sample ?.



Thanks
chrisb
Posts: 14562
Joined: Tue Mar 17, 2015 9:14 am

Re: FreeCad Path problem

Postby chrisb » Mon Apr 15, 2019 8:35 pm

It is simple: Select the edge of a hole, create deburr.
Bildschirmfoto 2019-04-15 um 22.34.28.png
Bildschirmfoto 2019-04-15 um 22.34.28.png (15.3 KiB) Viewed 107 times
Attachments
deburr.FCStd
(16 KiB) Downloaded 3 times