Hi
if i try to export a path Projekt to a gCode file for Postprozesser Linuxcnc it dosn't work. Export without postprzessor works, but Linuxcnc don't work with this Code.
Do i make somthing wrong? or do i have to install some extra components?
solved Probelm with gCode export
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
solved Probelm with gCode export
Last edited by herbk on Wed Mar 30, 2016 6:40 pm, edited 1 time in total.
Gruß Herbert
Re: Probelm with gCode export
It works for me with https://github.com/sliptonic/FreeCAD.git pathimprove branch
Path module is in beta state and is under active development.
Path module is in beta state and is under active development.
Need help? Feel free to ask, but please read the guidelines first
[Solved] Problem with G-code export
Hi Cox,
and the Problem with the gCode export seams to be a local Problem on my opensuse 13.2 installation. On a opensuse leap it works (Frecad Version is identical), - therefore i'll set the tread to "solved".
i know that...Path module is in beta state and is under active development.
and the Problem with the gCode export seams to be a local Problem on my opensuse 13.2 installation. On a opensuse leap it works (Frecad Version is identical), - therefore i'll set the tread to "solved".
Last edited by danielfalck on Thu Mar 31, 2016 4:07 am, edited 1 time in total.
Reason: added title so that it shows in top level on forum
Reason: added title so that it shows in top level on forum
Gruß Herbert