Path - profile from edge

Here's the place for discussion related to CAM/CNC and the development of the Path module.
Post Reply
martys
Posts: 6
Joined: Mon Aug 14, 2017 6:22 am

Path - profile from edge

Postby martys » Tue Feb 06, 2018 6:55 pm

Hello everyone,
I would like to ask if its posible to create path like this on the image below ( CatiaV5R20) in FC. My version is 0.17.12570
Image

Also it is posible to add approach and retract to various paths ?
File added
Thanks in advace
Attachments
Path test.FCStd
(99.77 KiB) Downloaded 9 times
Top
chrisb
Posts: 30786
Joined: Tue Mar 17, 2015 9:14 am

Re: Path - profile from edge

Postby chrisb » Tue Feb 06, 2018 9:46 pm

We had discussed this here recently. Currently it is not (directly) possible to create this quarter circle pocket, because there are the holes working as borders for the path algorithm.
As a workaround you have to use a base object without the holes, possibly in a different job.
You need at least FreeCAD 0.19.23300 to edit my current sketches.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Top
Post Reply
Powered by phpBB® Forum Software © phpBB Limited