micksulley wrote: ↑
Wed Jul 11, 2018 10:35 pm
In your file I can change all of the Op Values, but in mine they are all grey and cannot be changed. Do you know why I cannot change those values in mine and how to fix it?
These values are Expressions
, which you have to discard before setting a fixed value or you click on the blue f(x) symbol and change the expression, e.g. by setting a fixed value.
The other problem is that it looks like you selected each hole individually to create the operations. This design is an example, what I am trying to create will have around 200 holes, so I was hoping there would be a way to do that. Using the profile operation I just select the top or bottom surface and it picks up all of the holes. I cannot see a way to do that with pocket.
There are several possible solutions:
- You take a mill which has a diameter bigger than half of the counterbore's diameter. Then you can take the profile operation
- if the holes have equal distance you can use PathArray to repeat a path
- you drill the hole first and the counterbore later, then the diameter of the mill has to cover only the stripe around the hole