hi all im the New German tatcher replacing the Deceased Dressup maker
I refer to the 0,18 version Daily i installed on Ubuntu Bionic
The Version got the LeadinOut Dressup Repake
and this doesent work as expected while the 0,17 installed on near 100+ PC in education Here from the Dressup Builder works perfect
SO Question why has this been changed to a non Expected working version
Try the Hole CRC like in this VIDEO
https://www.youtube.com/watch?v=xOM7mg3VkUo
it works on all Systems he installed and non on the new Dressup remake
can this be changed Back so Students and users at Home can reproduce the Working G-code
Thanks for replay
Dressup Leadin Remake
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
- sliptonic
- Veteran
- Posts: 3459
- Joined: Tue Oct 25, 2011 10:46 pm
- Location: Columbia, Missouri
- Contact:
Re: Dressup Leadin Remake
Hi, and welcome.
I was sorry to hear about Mr Lothar passing.
Unfortunately, he was the only one maintaining the dressup and hasn't received much maintenance since. The version we had was an early implementation and he died before he was able to really stabilize the feature.
To be honest, we've had quite a bit of trouble with leadin/leadout and start points and the entire dressup needs to be rewritten. The code base has moved on in the last year so reverting isn't really an option.
Please follow this thread:
https://forum.freecadweb.org/viewtopic.php?f=15&t=34597
I really hope someone steps up to improve start points and leadin/leadout for v0.19
I was sorry to hear about Mr Lothar passing.
Unfortunately, he was the only one maintaining the dressup and hasn't received much maintenance since. The version we had was an early implementation and he died before he was able to really stabilize the feature.
To be honest, we've had quite a bit of trouble with leadin/leadout and start points and the entire dressup needs to be rewritten. The code base has moved on in the last year so reverting isn't really an option.
Please follow this thread:
https://forum.freecadweb.org/viewtopic.php?f=15&t=34597
I really hope someone steps up to improve start points and leadin/leadout for v0.19
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: Dressup Leadin Remake
Thank You Very Mutch for Replay
i added the Working Dressup as a Zip inside is the PY
it workes only on humen given Startpoints as YOU pointed
all the people that use it shoudt know this
BUT it woudt be better to get the "old" code online then a NEW nonworking one
i added the Working Dressup as a Zip inside is the PY
it workes only on humen given Startpoints as YOU pointed
all the people that use it shoudt know this
BUT it woudt be better to get the "old" code online then a NEW nonworking one
- Attachments
-
- PathDressupLeadInOut.zip
- Dressup Working Circle on CRC
- (4.2 KiB) Downloaded 47 times
Re: Dressup Leadin Remake
Just a thing i noticed:
Besides preventing errors caused between the steering-wheel and driver seat, because the amount off settings to be correct.
One of it's issues is the placement off leadout end on inside profiles should be on the same point as the leadinstart and not inside the solid
Setting a angle might be off more use than arc,tangent or perpendicular as well
Besides preventing errors caused between the steering-wheel and driver seat, because the amount off settings to be correct.
One of it's issues is the placement off leadout end on inside profiles should be on the same point as the leadinstart and not inside the solid
Setting a angle might be off more use than arc,tangent or perpendicular as well
- Attachments
-
- Screenshot from 2019-03-13 19-29-47.png (180.31 KiB) Viewed 1461 times
Re: Dressup Leadin Remake
I tried this yesterday too and noticed the same effect: On inside paths, the dressup will be on the outside of the path, but it looks like there is no option to control the tangent to be from the inside or from the outside.
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: Dressup Leadin Remake
if you use this dressup from the past bevor codechange it will work
Delete the dressup change the python file and reuply the dressup
@reox
file inside the ZIP
Delete the dressup change the python file and reuply the dressup
@reox
file inside the ZIP
- Attachments
-
- PathDressupLeadInOut.zip
- (4.2 KiB) Downloaded 43 times
Re: Dressup Leadin Remake
the changes between current master and your file are actually not too big.
Everything I see there, is that code duplication was removed by moving it into a separate function.
And even with your code, the direction is still wrong:
Everything I see there, is that code duplication was removed by moving it into a separate function.
And even with your code, the direction is still wrong:
- Attachments
-
- path_test.FCStd
- (22.47 KiB) Downloaded 60 times
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: Dressup Leadin Remake
if you setthe startpoint to a quadrant it will work
x27.5 y15
use startpoint True
x27.5 y15
use startpoint True
- Attachments
-
- path_test.FCStd
- (22.59 KiB) Downloaded 44 times
Re: Dressup Leadin Remake
Thanks for the tip,
Can do with this work around for now, only imagine a part with 100+ holes and manually setting a startpoint for each one...
Can do with this work around for now, only imagine a part with 100+ holes and manually setting a startpoint for each one...