Hello,
I m not able to use path on this design. I can not do Camber and Profile Face get problem. Who can help that i can mill this.
Thanks
FreeCad Path problem
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
FreeCad Path problem
- Attachments
-
- WerkzeugHalter-V2.FCStd
- (140.56 KiB) Downloaded 55 times
Re: FreeCad Path problem
Moved to Path forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- sliptonic
- Veteran
- Posts: 3460
- Joined: Tue Oct 25, 2011 10:46 pm
- Location: Columbia, Missouri
- Contact:
Re: FreeCad Path problem
You need to give us a bit more to go on. What are you trying to achieve?
What results are you seeing that aren't right?
What results are you seeing that aren't right?
Re: FreeCad Path problem
With "Camber" you mean "Chamfer"? As mlampert pointed out in the other topic where you posted, there is no chamfer path operation yet so it is calle deburr. You can apply it to the unchamfered hole, the chamfering is simply done by the tool.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: FreeCad Path problem
Ok,
You mean. I just draw a normal hole and in path i choose it.
I tried deburr after switching on experimental. But i still can not do this. Can you give me a small drawing with a sample ?.
Thanks
You mean. I just draw a normal hole and in path i choose it.
I tried deburr after switching on experimental. But i still can not do this. Can you give me a small drawing with a sample ?.
Thanks
Re: FreeCad Path problem
It is simple: Select the edge of a hole, create deburr.
- Attachments
-
- deburr.FCStd
- (16 KiB) Downloaded 58 times
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.