Dogbone Dressup is only on one side

[blue0cean]

Dogbone Dressup is only on one side, do I have to change anything on the settings?

OS: Windows 10 (10.0)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.20221 (Git)
Build type: Release
Branch: master
Hash: e25cdd2d043f3fbe5f71155a296f322aec6b85b7
Python version: 3.6.8
Qt version: 5.12.1
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)

Dogbone.jpg (87.38 KiB) Viewed 475 times

[herbk]

Hi,
i have had this prob to, but don't remember the solution... I will look at it later, just have to do a bit af work before.

[herbk]

Hi,

first: if i open your file i get a lot of error messages... But it seams that it's from missing WBs.

You are using just the "default tool" for path creation, may be that's the problem...

I just add a toolcontroller to the job and the missing dogbone appers, - without changing to the added tool.

ZangenTrenner19V2_herbk.jpg (107.53 KiB) Viewed 380 times

OS: openSUSE Leap 42.3 (KDE//usr/share/xsessions/plasma5)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.20209 (Git) AppImage
Build type: Release
Branch: master
Hash: 5fc4a26a00390e91cbf91848b766b68ad87e5917
Python version: 3.8.2
Qt version: 5.12.5
Coin version: 4.0.0
OCC version: 7.4.0
Locale: German/Germany (de_DE)

[blue0cean]

I have just further examined, it seems to depend on how long an inward edge has occurred. I noticed that left edges are hidden earlier than right edges. As soon as you reverse milling CCW no dogbone is possible.

Dogbone.jpeg (63.92 KiB) Viewed 374 times

OS: Windows 10 (10.0)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.20276 (Git)
Build type: Release
Branch: master
Hash: 3a0d9e8c514c163be0b750dd75bb4f2afe4f94f1
Python version: 3.6.8
Qt version: 5.12.1
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)