Here is the project file, I select trajectories, add them to the operation - FC thinks hard and as a result produces a bad result.
What am I doing wrong?
Error in creating edge path
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Error in creating edge path
- Attachments
-
- Снимок экрана от 2020-03-24 14-57-58.png (185.15 KiB) Viewed 470 times
-
- Снимок экрана от 2020-03-24 15-06-24.png (191.94 KiB) Viewed 470 times
-
- ser.FCStd
- (219.49 KiB) Downloaded 19 times
- roerich_64
- Veteran
- Posts: 1465
- Joined: Thu May 21, 2015 7:00 pm
- Location: Ostfriesland
Re: Error in creating edge path
Hi,
'Contour' is what you search: Bests
Walter
'Contour' is what you search: Bests
Walter
Die Liebe wird siegen, denn sie ist unzerstörbar
Re: Error in creating edge path
Yeah, that's the way I know it, and I had to use it. But it's bad - I had a lot of parts planned from one piece and the last operation I cut them off in the right order, usually from the center to the edges. And the contour operation processes all the parts on the workpiece at once and does not allow me to set the order of their processing.
- Attachments
-
- Снимок экрана от 2020-03-25 08-56-41.png (281.96 KiB) Viewed 406 times
Re: Error in creating edge path
You need multiple contour operations then. I don't think that's an error, perhaps a missing feature.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.