Error in creating edge path

Here's the place for discussion related to CAM/CNC and the development of the Path module.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
memfis
Posts: 585
Joined: Tue Nov 15, 2016 7:58 pm

Error in creating edge path

Post by memfis »

Here is the project file, I select trajectories, add them to the operation - FC thinks hard and as a result produces a bad result.
What am I doing wrong?
Attachments
Снимок экрана от 2020-03-24 14-57-58.png
Снимок экрана от 2020-03-24 14-57-58.png (185.15 KiB) Viewed 471 times
Снимок экрана от 2020-03-24 15-06-24.png
Снимок экрана от 2020-03-24 15-06-24.png (191.94 KiB) Viewed 471 times
ser.FCStd
(219.49 KiB) Downloaded 19 times
User avatar
roerich_64
Veteran
Posts: 1465
Joined: Thu May 21, 2015 7:00 pm
Location: Ostfriesland

Re: Error in creating edge path

Post by roerich_64 »

Hi,

'Contour' is what you search:
ser_I.jpg
ser_I.jpg (200.91 KiB) Viewed 437 times
ser_I.FCStd
(241.85 KiB) Downloaded 21 times
Bests
Walter
Die Liebe wird siegen, denn sie ist unzerstörbar :) ;)
memfis
Posts: 585
Joined: Tue Nov 15, 2016 7:58 pm

Re: Error in creating edge path

Post by memfis »

Yeah, that's the way I know it, and I had to use it. But it's bad - I had a lot of parts planned from one piece and the last operation I cut them off in the right order, usually from the center to the edges. And the contour operation processes all the parts on the workpiece at once and does not allow me to set the order of their processing.
Attachments
Снимок экрана от 2020-03-25 08-56-41.png
Снимок экрана от 2020-03-25 08-56-41.png (281.96 KiB) Viewed 407 times
chrisb
Veteran
Posts: 53785
Joined: Tue Mar 17, 2015 9:14 am

Re: Error in creating edge path

Post by chrisb »

You need multiple contour operations then. I don't think that's an error, perhaps a missing feature.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply