Hello Path-people!
I would like to make an hole for a washer simply because (I think) the operation it is more fast. In fact, the helix path does not stop the tool to mill another layer (I have do make hundreds of this washer).
Why I get the result below when I apply the operation at the internal border of the 5 mm hole? I'm missing something?
(I attach the .fcstd file)
-----------------------------------------------------
OS: Ubuntu 16.04.7 LTS (XFCE/xfce)
Word size of FreeCAD: 64-bit
Version: 0.20.25065 (Git) AppImage
Build type: Release
Branch: master
Hash: 4de2ad46b2b9c78ac2721a0dbea7c19306261095
Python version: 3.9.4
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.2
Locale: English/United States (en_US)
[SOLVED] How to make an hole with the helix path?
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
-
- Posts: 541
- Joined: Fri Aug 26, 2016 9:07 pm
- Location: Munich - Gemany
[SOLVED] How to make an hole with the helix path?
- Attachments
-
- flat-scheibe M5x14.FCStd
- (25.29 KiB) Downloaded 18 times
Last edited by Giulio Buccini on Tue Jul 27, 2021 10:54 pm, edited 1 time in total.
-
- Posts: 541
- Joined: Fri Aug 26, 2016 9:07 pm
- Location: Munich - Gemany
Re: How to make an hole with the helix path?
SOLVED.
I had just to go in "Base Geometry" and unselect one of the two faces... shame on me!
I had just to go in "Base Geometry" and unselect one of the two faces... shame on me!
Re: [SOLVED] How to make an hole with the helix path?
Good to see it working. You can prepend "[Solved]" before the subject of the first post.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.