text color

Here's the place for discussion related to CAM/CNC and the development of the Path module.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
MisterMaker
Posts: 739
Joined: Mon Sep 21, 2020 7:41 am

text color

Post by MisterMaker »

I was doing some testing on the 0.2 beta since I needed to make a cnc program.
I noticed that the text in the horizontal feedrates and vertical feedrates is a bit dark and in some theme's barely readable. (Note it is pretty good readable on the screenshot below but on my screen it's not)
It stays the same black on the white theme and it is very good readable on a light theme. so it has the opposite effect on the light theme.
FreeCAD_bSWQvwNmds.png
FreeCAD_bSWQvwNmds.png (34.99 KiB) Viewed 837 times
Also I wondered if the naming shouldn't be:
X/Y feedrates
Z feedrate
X/Y Rapids
Z Rapids
These axis should be standardized as far as I was though like below coordinate system.
multi-axis-machining-1113595429.jpg
multi-axis-machining-1113595429.jpg (12.1 KiB) Viewed 837 times
Edit also in
FreeCAD_dQzARCdLMi.png
FreeCAD_dQzARCdLMi.png (34.24 KiB) Viewed 830 times
Also in
FreeCAD_Fz2gvqgP55.png
FreeCAD_Fz2gvqgP55.png (40.33 KiB) Viewed 828 times
Tool library background is white text on gray background:
FreeCAD_awkKSmD2xi.png
FreeCAD_awkKSmD2xi.png (68.16 KiB) Viewed 827 times
User avatar
Kunda1
Veteran
Posts: 13434
Joined: Thu Jan 05, 2017 9:03 pm

Re: text color

Post by Kunda1 »

I think this thread summary name is too vague and ambiguous. Please consider renaming it to attract the correct attention. TIA
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Post Reply