Dogbone & leadinout. It is not possible to apply them both (sequentially or in parallel) to the same operation.

Here's the place for discussion related to CAM/CNC and the development of the Path module.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
memfis
Posts: 586
Joined: Tue Nov 15, 2016 7:58 pm

Dogbone & leadinout. It is not possible to apply them both (sequentially or in parallel) to the same operation.

Post by memfis »

Colleagues,

there is a question to the additional options of the created operation. Dogbone & leadinout. It is not possible to apply them both (sequentially or in parallel) to the same operation. Either only gogbone or leadinout is possible. Agree, this is wrong - it should be possible to apply both additional options.

Besides, there is a problem in the leadinoiut implementation - in the settings you can set the "do not lift the tool" option, but when you implement this option, the transition between the leadout end point and the leadin start point is implemented as G0, while it should be G1. This will cause the tool to break.
Post Reply