Hi everyone
This is the icons I have posted about here
viewtopic.php?f=10&t=5520&p=44703#p44703
viewtopic.php?f=10&t=5482
Here is the repo, rebased on SF master just now. The branch is at my Bitbucket repo and is called "icon_integration_pull_request", here is a direct link to the branch.
https://bitbucket.org/jmaustpc/my-clone ... ll_request
added icons List
Alignment.svg
Create_Duplicate.svg
Placement.svg
Part_Convert_To_Solid.svg
Part_Create_Compound.svg
Part_Create_Simple_Copy.svg
Part_Reverse_Shape.svg
Jim
[Open]various Part workbench and main icons
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
[Open]various Part workbench and main icons
Last edited by NormandC on Sat Oct 04, 2014 6:54 pm, edited 1 time in total.
Reason: Added [Open] tag.
Reason: Added [Open] tag.
Re: various Part workbench and main icons
Hi all
Was there anything wrong with these icons or the associated code in my branch?
These listed below are the versions I used in my branch, I don't mind if you want to use different version which I posted or something else. I'll make new ones if you have a problem with one or some of them, if you like?
Jim
Added Icons List
Alignment.svg
Create_Duplicate.svg
Placement.svg
Part_Convert_To_Solid.svg
Part_Create_Compound.svg
Part_Create_Simple_Copy.svg
Part_Reverse_Shape.svg
Was there anything wrong with these icons or the associated code in my branch?
These listed below are the versions I used in my branch, I don't mind if you want to use different version which I posted or something else. I'll make new ones if you have a problem with one or some of them, if you like?
Jim
Added Icons List
Alignment.svg
Create_Duplicate.svg
Placement.svg
Part_Convert_To_Solid.svg
Part_Create_Compound.svg
Part_Create_Simple_Copy.svg
Part_Reverse_Shape.svg
Re: various Part workbench and main icons
I did not know about the make compound function in the Part-Workbench until recently, as I used only tools with an icon.
So I really welcome icons for the functions, which do not have one.
Ulrich
So I really welcome icons for the functions, which do not have one.
Ulrich
Re: various Part workbench and main icons
Another time it can be helpful is if you want to make a custom tool bar. For example if you often find you want to use a small number of functions of a different workbench from within another workbench, you can make a custom tool bar with those functions of the other workbench. e.g add Draft Array to the Part workbench....or add Part "check geometry" to PartDesign workbench or Draft etc.ulrich1a wrote:I did not know about the make compound function in the Part-Workbench until recently, as I used only tools with an icon.
So I really welcome icons for the functions, which do not have one.
Ulrich
Re: various Part workbench and main icons
These icons look good to me, besides I won't criticize if I'm not willing to design alternatives
I'm just worried the reverse shape icon looks a lot like the refresh/recompute icon. Also, does this tool work on edges?
I'm just worried the reverse shape icon looks a lot like the refresh/recompute icon. Also, does this tool work on edges?
Re: various Part workbench and main icons
Hi Norm, I took a while to answer that, I had to experiment.normandc wrote: Also, does this tool work on edges?
It used to do so in 0.13, I don't know if it is still doing so in 0.14 or not, because the Part Ruled Surface tool has changed its behaviour. The picture shows what 0.13 used to do, but now 0.14 seems to automatically work out which vertex is the best to link to which other vertex.
This below is what it looks like in 0.13 if one line is reversed and you use Part Ruled Surface this is the same file as above in 0.14Dev from today, at first it opens the file the same as 0.13 but then if you force a recompute by adjusting a parameter it changes it to what it would do if you had just used Part Ruled Surface in 0.14dev. then if you open the file again in 0.13 it looks as you saved it in 0.14...once again if you recompute it goes back to twisted shape as 0.13 first made.
Jim