https://www.freecadweb.org/wiki/File:Fem-analysis.svg

or

https://www.freecadweb.org/wiki/File:Fem_Analysis.svg

**Moderator:** bernd

https://www.freecadweb.org/wiki/File:Fem-analysis.svg

or

https://www.freecadweb.org/wiki/File:Fem_Analysis.svg

or

https://www.freecadweb.org/wiki/File:Fem_Analysis.svg

Want to contribute back to FC? Checkout:

#lowhangingfruit**|** Use the Source, Luke. **|** How to Help FreeCAD **|** How to report FC bugs and features

#lowhangingfruit

In the source code, the file is called "fem-analysis.svg".

In the wiki all pages should start with a capital letter, so the wiki calls this file, "Fem-analysis.svg".

The icon "Fem_Analysis.svg" looks a bit bigger, and the color is a bit darker. Moreover, this icon is only used in what appears to be a test page by quick61 from 2014, Artwork_quick61_rework.

Therefore, I think the second of the icons that you present can be removed.

Always add the important information to your posts if you need help.

To support the documentation effort, and code development, your donation is appreciated: paypal.

To support the documentation effort, and code development, your donation is appreciated: paypal.

wait! The second one looks much better! I will have a look. Icons in FEM where renamed a few times.

It is the opposite! The second one is the one which is used in source code and which is therefor used in FreeCAD software. This should stay as it is in the wiki! https://github.com/FreeCAD/FreeCAD/blob ... alysis.svgvocx wrote: ↑Sat Feb 15, 2020 1:27 amThe icon "Fem_Analysis.svg" looks a bit bigger, and the color is a bit darker. Moreover, this icon is only used in what appears to be a test page by quick61 from 2014, Artwork_quick61_rework.

Therefore, I think the second of the icons that you present can be removed.

bernd wrote: ↑Sat Feb 15, 2020 11:52 amIt is the opposite! The second one is the one which is used in source code and which is therefor used in FreeCAD software. This should stay as it is in the wiki! https://github.com/FreeCAD/FreeCAD/blob ... alysis.svg

I'll remove the 1st icon then and re-name the link on the pages that use it.

Want to contribute back to FC? Checkout:

#lowhangingfruit**|** Use the Source, Luke. **|** How to Help FreeCAD **|** How to report FC bugs and features

#lowhangingfruit

Well, I was talking about the page name, as that is what matters in the wiki.

The page "Fem-analysis.svg" should be kept. Of course, its content can be updated with the actual icon used in the source code but that's a trivial step.

Always add the important information to your posts if you need help.

To support the documentation effort, and code development, your donation is appreciated: paypal.

To support the documentation effort, and code development, your donation is appreciated: paypal.

Can we rename it in the source code then?

So it's all uniform ?

Aren't other icons using snake_case ?

So it's all uniform ?

Aren't other icons using snake_case ?

Want to contribute back to FC? Checkout:

#lowhangingfruit**|** Use the Source, Luke. **|** How to Help FreeCAD **|** How to report FC bugs and features

#lowhangingfruit

There is nothing standard in FreeCAD, in general. This is the reason we need to improve standardization across different workbenches.

In FEM, icons are like this.

Code: Select all

```
ls -1 src/Mod/Fem/Gui/Resources/icons/
Arch_Material_Group.svg
fem-add-fem-mesh.svg
fem-add-material.svg
fem-add-part.svg
fem-analysis.svg
fem-clipping-plane-add.svg
fem-clipping-plane-remove-all.svg
fem-constraint-bearing.svg
fem-constraint-contact.svg
fem-constraint-displacement.svg
fem-constraint-electrostatic-potential.svg
fem-constraint-fixed.svg
fem-constraint-flow-velocity.svg
fem-constraint-fluid-boundary.svg
fem-constraint-force.svg
fem-constraint-gear.svg
fem-constraint-heatflux.svg
fem-constraint-initial-flow-velocity.svg
fem-constraint-initial-temperature.svg
fem-constraint-planerotation.svg
fem-constraint-pressure.svg
fem-constraint-pulley.svg
fem-constraint-selfweight.svg
fem-constraint-temperature.svg
fem-constraint-transform.svg
fem-element-fluid-1d.svg
fem-element-geometry-1d.svg
fem-element-geometry-2d.svg
fem-element-rotation-1d.svg
fem-equation-elasticity.svg
fem-equation-electrostatic.svg
fem-equation-flow.svg
fem-equation-fluxsolver.svg
fem-equation-heat.svg
fem-femmesh-boundary-layer.svg
fem-femmesh-clear-mesh.svg
fem-femmesh-create-node-by-poly.svg
fem-femmesh-from-shape.svg
fem-femmesh-gmsh-from-shape.svg
fem-femmesh-netgen-from-shape.svg
fem-femmesh-print-info.svg
fem-femmesh-region.svg
fem-femmesh-result.svg
fem-femmesh-to-mesh.svg
fem-material-fluid.svg
fem-material-nonlinear.svg
fem-material-reinforced.svg
fem-material.svg
fem-post-data-pipline.svg
fem-post-filter-clip-region.svg
fem-post-filter-clip-scalar.svg
fem-post-filter-cut-function.svg
fem-post-filter-data-along-line.svg
fem-post-filter-data-at-point.svg
fem-post-filter-linearized-stresses.svg
fem-post-filter-warp.svg
fem-post-geo-box.svg
fem-post-geo-cylinder.svg
fem-post-geo-isosurface.svg
fem-post-geo-plane.svg
fem-post-geo-sphere.svg
fem-post-result-show.svg
fem-post-results-purge.svg
fem-solver-analysis-frequency.svg
fem-solver-analysis-static.svg
fem-solver-analysis-thermomechanical.svg
fem-solver-control.svg
fem-solver-elmer.svg
fem-solver-inp-editor.svg
fem-solver-run.svg
fem-solver-standard.svg
FemWorkbench.svg
preferences-fem.svg
```

Always add the important information to your posts if you need help.

To support the documentation effort, and code development, your donation is appreciated: paypal.

To support the documentation effort, and code development, your donation is appreciated: paypal.

Is this a project that someone int the FEM community would be able to tackle before the upcoming release in April ? It would be very good to uniform the documentation as best as possible before that.

#lowhangingfruit