Help with testing - part 6

About the development of the FEM module/workbench.

Moderator: bernd

User avatar
bernd
Veteran
Posts: 12849
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland
Contact:

Re: Help with testing - part 6

Post by bernd »

bernd wrote:...Attached the famous CalculiX cantilever. Deformation in force direction should be around 88 mm.
viewtopic.php?f=18&t=10144
PrzemoF wrote: Maximum absolute displacement is 87.5816 mm.
87.5816 mm = 88 mm --> Perfect everything seams fine !

On current windows I get: max displacement 3.41359e+05 mm which is far far away from 88 mm
User avatar
bernd
Veteran
Posts: 12849
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland
Contact:

Re: Help with testing - part 6

Post by bernd »

I may found it. Your branch uses DLOAD for FemConstraintForce. We had this for a short period of commits. We should not make any development based on these commits ! Any force direction is useless. The windows version I have been using is from the same time period.

@przemo:
could you rebase your branch with current master?
User avatar
PrzemoF
Veteran
Posts: 3520
Joined: Fri Jul 25, 2014 4:52 pm
Contact:

Re: Help with testing - part 6

Post by PrzemoF »

sgrogan wrote:In addition to fandaL's observations, which I can repeat. When results are purged if colors or displacement are displayed in the 3-D view they are not purged. With a new analysis the results are unchanged, they can be manually reset by opening up the results and manually resetting to none colors or zero displacement.[..]
I got it fixed, so it will be included in the next pull request - thanks!
Post Reply