Hi bug in fem materials adding 0swhen tabbing to the next field. ??

About the development of the FEM module/workbench.

Moderator: bernd

josheeg
Posts: 82
Joined: Tue Nov 12, 2013 3:10 pm

Hi bug in fem materials adding 0swhen tabbing to the next field. ??

Postby josheeg » Mon Aug 20, 2018 4:45 am

[bug]freecad v 0.17 windows 10 release coppy of freecad when putting a value in fem material new more 0s appear after tabbing to the next field. Gui bug or operator error? :geek: :ugeek: [/bug]
User avatar
Kunda1
Posts: 7465
Joined: Thu Jan 05, 2017 9:03 pm

Re: Hi bug in fem materials adding 0swhen tabbing to the next field. ??

Postby Kunda1 » Mon Aug 20, 2018 10:18 am

Hover over the [bug] label to see how it's used. It's used to reference ticket numbers in our bug tracker. 😉
You should also probably be using 0.18dev if you want to benefit from a more up to date FEM work bench. Please read the guidelines on how to properly post asking for help for the devs to help you.
Want to contribute back to FC? Checkout:
#lowhangingfruit | Use the Source, Luke. | How to Help FreeCAD | How to report FC bugs and features
User avatar
bernd
Posts: 10089
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: Hi bug in fem materials adding 0swhen tabbing to the next field. ??

Postby bernd » Mon Aug 20, 2018 4:17 pm

@josheeg

- I can not reproduce this.
- would you try in 0.18 dev?
- would you be more specific ... which gui fild? Did you use a new file or an example or whatever? just write down any step starting with start FreeCAD
josheeg
Posts: 82
Joined: Tue Nov 12, 2013 3:10 pm

Re: Hi bug in fem materials adding 0swhen tabbing to the next field. ??

Postby josheeg » Wed Aug 22, 2018 5:04 pm

Bug Freecad fem material
windows 10
freecad 0.17 release
will try 0.18 but it is dev
create a cube in part 1”
go to fem workbench
analysys
add material
density I put a decimal point in after 1700. and 3 zeros apeared
youngs model number I set to 3333333. psi
modulus I set to .2
I save the material and it doesn't record all the numbers maby I have to save it as a different file.
that seemed to hold.