FEM results rendering error

[cadman]

Hi,

I'm new to the community and not sure if this was addressed before.

Downloaded FreeCAD today and Selected "Learn FEM 3D new solver example analysis"

and this showed up..

Screen Shot 2018-09-08 at 3.00.22 PM.png (60.01 KiB) Viewed 549 times

My system details:

Model Name: MacBook Pro

Model Identifier: MacBookPro11,1
Processor Name: Intel Core i5
Processor Speed: 2.6 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 8 GB
Boot ROM Version: MBP111.0146.B00
SMC Version (system): 2.16f68
Serial Number (system): C02P4XPLG3QH
Hardware UUID: 4B07D252-8A10-5B9E-87C0-A7FFB96F071B


Seems like a rendering error to me. Pls. help

[Jee-Bee]

it could also be a visibility issue.

can you try to set the backlight option on? in preferences>>display

[polymer]

Maybe another error?
And, why I get Always "0" displacement, but stress is correct?

[bernd]

- start FreeCAD
- open FEM 3D new solver example
- DoubleClick on SolverElmerResult object
- see screen, seams good to me.

- could you be more specific what exactly I need to do to reproduce your problem.


OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.14709 (Git)
Build type: Release
Branch: master
Hash: faad5ea27301cb7af393a25d317c406d3098bafe
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: German/Switzerland (de_CH)

screen.jpg (128.19 KiB) Viewed 384 times

[polymer]

Okay, so please try:

- start FreeCAD
- open FEM 3D new solver example
- close the vtkOutputWindow (Picture attached)
- activate the analysis
- create result processing pipleline from calculix results
- doubleclick on the Pipeline
- choose Mode: Surface
- try some field and Vector Options and move the slider

[bernd]

What version of FreeCAD do you run? Would you print your version info?

I have never seen a vtkOutputWindow!

Post in the regard of your problem will follow ...

[polymer]

What version of FreeCAD do you run? Would you print your version info?

I have never seen a vtkOutputWindow!

Post in the regard of your problem will follow ...

Sorry, here it is:

Code: Select all

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.14709 (Git)
Build type: Release
Branch: master
Hash: faad5ea27301cb7af393a25d317c406d3098bafe
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)

[bernd]

There is indeed a problem with diggits. It is not 0 it is 0.087 mm means 1000 times smaller than it should be ... See numbers on the color bar on the right. If a warp factor is added the problem is seen better because on needs a huge warp factor so see some warp. Attached two screen. I try to have a look at this.

bernd

screen.jpg (157.01 KiB) Viewed 367 times

screen2.jpg (217.08 KiB) Viewed 367 times

[bernd]

continues here: https://forum.freecadweb.org/viewtopic. ... 13#p256813