FEM MESH HAS NO VOLUME ELEMENTS
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
FEM MESH HAS NO VOLUME ELEMENTS
Hi,
I just registered on the forum and immediately apologize for my English.
I have a problem with the FEM module.
The mechanical design, by corporate choice, is made with Creo Elements.
For this reason, to import my model into FreeCAD I use the STEP file.
I import the model, I combine all the details with the Boolean operation of union, I create the FEM analysis, I assign the material, I assign the constraints, I assign the forces, I create the MESH "N" and I have no problem.
When I launch the simulation, I get the following error message:
FEM mesh has no volume elements, either define a shell thicknesses or provide a FEM mesh with volume elements.
Anyone can tell me where I'm wrong and how can I do to go on ??
Thanks in advance.
Have a nice weekend.
I just registered on the forum and immediately apologize for my English.
I have a problem with the FEM module.
The mechanical design, by corporate choice, is made with Creo Elements.
For this reason, to import my model into FreeCAD I use the STEP file.
I import the model, I combine all the details with the Boolean operation of union, I create the FEM analysis, I assign the material, I assign the constraints, I assign the forces, I create the MESH "N" and I have no problem.
When I launch the simulation, I get the following error message:
FEM mesh has no volume elements, either define a shell thicknesses or provide a FEM mesh with volume elements.
Anyone can tell me where I'm wrong and how can I do to go on ??
Thanks in advance.
Have a nice weekend.
Re: FEM MESH HAS NO VOLUME ELEMENTS
yes, your mesh has no volume elements. This mostly happens when your geometry does not contain solid geometry or has problems. Would you post your geometry? May be have a look her too ... https://forum.freecadweb.org/viewtopic. ... 10#p285383
Re: FEM MESH HAS NO VOLUME ELEMENTS
Good morning and good start of the week to everyone.
I attach some images to clarify the situation.
It is a simple structure in 50x3 square tubes with some worked plates.
Thank you in advance.
I attach some images to clarify the situation.
It is a simple structure in 50x3 square tubes with some worked plates.
Thank you in advance.
- Attachments
-
- Mesh results
- Cattura3.JPG (103.82 KiB) Viewed 8214 times
-
- Structure
- Cattura2.JPG (77.08 KiB) Viewed 8214 times
-
- Error Message
- Cattura1.JPG (243.47 KiB) Viewed 8214 times
Re: FEM MESH HAS NO VOLUME ELEMENTS
might be easy for you to create but for sure not for the mesher to mesh with volume elements.
Have you checked your geometry? See https://forum.freecadweb.org/viewtopic. ... 10#p285492
Have you checked your geometry? See https://forum.freecadweb.org/viewtopic. ... 10#p285492
Re: FEM MESH HAS NO VOLUME ELEMENTS
I assume your mesh has no volumes. You can check this by right click on the mesh and print mesh infromations. If you would like to make a analysis with volume elements you should provide a mesh with volume elements. Example from FEM 3D example ...
Re: FEM MESH HAS NO VOLUME ELEMENTS
I attach mesh info..
- Attachments
-
- Mesh Info
- Cattura.JPG (102.71 KiB) Viewed 8203 times
Re: FEM MESH HAS NO VOLUME ELEMENTS
how can I do a FEM 3D analysis ??
Re: FEM MESH HAS NO VOLUME ELEMENTS
as you can see there is no volume element in your mesh, thus you can not make a volume element analysis. For a volume element analysis you need to provide a mesh with volume elements.
I would recomend to play with 3D FEM example and 2D FEM example from StartWB for half an hour to understand the difference ...
Would you provide your Geometry as FreeCAD file?
I would recomend to play with 3D FEM example and 2D FEM example from StartWB for half an hour to understand the difference ...
Would you provide your Geometry as FreeCAD file?
Re: FEM MESH HAS NO VOLUME ELEMENTS
the freecad file is 117 mb, perhaps because of the mesh.
I attach the step file from which I start.
I attach the step file from which I start.
- Attachments
-
- SOLO_TEL.stp
- (663.83 KiB) Downloaded 82 times