GSoC2020, FEM: extend examples

About the development of the FEM module/workbench.

Moderator: bernd

User avatar
bernd
Posts: 11098
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: GSoC2020, FEM: extend examples

Postby bernd » Tue Mar 31, 2020 3:05 pm

lgtm

fluxsolver is an equation, the name is not suitable choosen, because off the word solver inside.
User avatar
Sudhanshu
Posts: 355
Joined: Mon Oct 15, 2018 5:22 am

Re: GSoC2020, FEM: extend examples

Postby Sudhanshu » Tue Mar 31, 2020 3:18 pm

bernd wrote:
Tue Mar 31, 2020 3:05 pm
lgtm

fluxsolver is an equation, the name is not suitable choosen, because off the word solver inside.
Ok. Ok.
Since the time is almost already over. I don't think I can improve the proposal any further. I had added your last suggestion by the way.
Can you give a final check to the proposal?

I will start revising my FEM concepts now and look for a simple example with which I can get started.
User avatar
bernd
Posts: 11098
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: GSoC2020, FEM: extend examples

Postby bernd » Tue Mar 31, 2020 3:45 pm

Sudhanshu wrote:
Tue Mar 31, 2020 3:18 pm
look for a simple example with which I can get started.
http://forum.freecadweb.org/viewtopic.php?f=18&t=19037
HoWil
Posts: 1204
Joined: Sun Jun 14, 2015 7:31 pm
Location: Austria

Re: GSoC2020, FEM: extend examples

Postby HoWil » Tue Mar 31, 2020 7:02 pm

Sudhanshu wrote:
Tue Mar 31, 2020 8:53 am
Also, I am not able to do analysis using elmer and I couldn't find any tutorial in the user documentation. So can you share some relevant documentation.
https://www.nic.funet.fi/index/elmer/do ... nonGUI.pdf
Links can be found here.... https://www.csc.fi/web/elmer/documentation
HoWil
Posts: 1204
Joined: Sun Jun 14, 2015 7:31 pm
Location: Austria

Re: GSoC2020, FEM: extend examples

Postby HoWil » Tue Mar 31, 2020 7:16 pm

A example for electrostatics would also be nice for future versions of FC-FEM.
I tried it over here:
https://forum.freecadweb.org/viewtopic. ... 40#p373292
https://forum.freecadweb.org/viewtopic. ... 10#p368353
I can support you for sure if you like to take this one. Currently, I do not have the time to implement it myself :roll: . Hope this will change in the next month 8-) .

And here some old examples the beam example, fluidics, electrostatics,... created during the integration of Elmer.. done by markus:
https://forum.freecadweb.org/viewtopic. ... 20#p194150 (and the following pages)

@Bernd: are there enough Mentors this year? I am not sure if I can and therefore should step in.
BR,
HoWil
User avatar
hardeeprai
Posts: 176
Joined: Sun May 23, 2010 2:41 pm
Location: Ludhiana, Punjab, India
Contact:

Re: GSoC2020, FEM: extend examples

Postby hardeeprai » Wed Apr 01, 2020 12:14 am

bernd wrote:
Sun Mar 29, 2020 7:01 pm
- create a example for each available constraint and each available analysis type or equation type
- take some of well known fea examples like the standard calculix ones or the calculix examples from martin kraska or examples from z88 or elmer or other open source fea.
https://github.com/pvossos/felt/tree/next/examples

Following might be give some idea:

https://dealii.org/developer/doxygen/de ... tep_1.html
--
H.S.Rai
User avatar
Sudhanshu
Posts: 355
Joined: Mon Oct 15, 2018 5:22 am

Re: GSoC2020, FEM: extend examples

Postby Sudhanshu » Thu Apr 02, 2020 3:20 pm

bernd wrote:
Tue Mar 31, 2020 3:45 pm
Sudhanshu wrote:
Tue Mar 31, 2020 3:18 pm
look for a simple example with which I can get started.
http://forum.freecadweb.org/viewtopic.php?f=18&t=19037
Thanks @bernd!
I will start with this one.
User avatar
Sudhanshu
Posts: 355
Joined: Mon Oct 15, 2018 5:22 am

Re: GSoC2020, FEM: extend examples

Postby Sudhanshu » Thu Apr 02, 2020 3:23 pm

HoWil wrote:
Tue Mar 31, 2020 7:02 pm
Sudhanshu wrote:
Tue Mar 31, 2020 8:53 am
Also, I am not able to do analysis using elmer and I couldn't find any tutorial in the user documentation. So can you share some relevant documentation.
https://www.nic.funet.fi/index/elmer/do ... nonGUI.pdf
Links can be found here.... https://www.csc.fi/web/elmer/documentation
Thanks @HoWil!
I will look into Elmer after I have created one example with Calculix.
User avatar
Sudhanshu
Posts: 355
Joined: Mon Oct 15, 2018 5:22 am

Re: GSoC2020, FEM: extend examples

Postby Sudhanshu » Thu Apr 02, 2020 3:29 pm

HoWil wrote:
Tue Mar 31, 2020 7:16 pm
A example for electrostatics would also be nice for future versions of FC-FEM.
I tried it over here:
https://forum.freecadweb.org/viewtopic. ... 40#p373292
https://forum.freecadweb.org/viewtopic. ... 10#p368353
I can support you for sure if you like to take this one. Currently, I do not have the time to implement it myself :roll: . Hope this will change in the next month 8-) .
Sure, I will appreciate your help. :D

HoWil wrote:
Tue Mar 31, 2020 7:16 pm
And here some old examples the beam example, fluidics, electrostatics,... created during the integration of Elmer.. done by markus:
https://forum.freecadweb.org/viewtopic. ... 20#p194150 (and the following pages)
Thanks for these.
I will look into them later.
User avatar
Sudhanshu
Posts: 355
Joined: Mon Oct 15, 2018 5:22 am

Re: GSoC2020, FEM: extend examples

Postby Sudhanshu » Thu Apr 02, 2020 3:37 pm

hardeeprai wrote:
Wed Apr 01, 2020 12:14 am
bernd wrote:
Sun Mar 29, 2020 7:01 pm
- create a example for each available constraint and each available analysis type or equation type
- take some of well known fea examples like the standard calculix ones or the calculix examples from martin kraska or examples from z88 or elmer or other open source fea.
https://github.com/pvossos/felt/tree/next/examples
Thans @hardeeprai
These are also added in the list.

hardeeprai wrote:
Wed Apr 01, 2020 12:14 am
Following might be give some idea:

https://dealii.org/developer/doxygen/de ... tep_1.html
Sorry, but I couldn't get the relevance of this link. :?: