@bernd
Thanks for the suggestion. I was thinking that I should move it to avoid hijacking but wasn't sure when to do it.
Next time, I'll post it on the following topic.
https://forum.freecadweb.org/viewtopic.php?f=18&t=55321
Thank you very much for the many comments on this announcement. I'd appreciate it if we could continue this topic there.
FEM_FrontISTR Workbench
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Re: FEM_FrontISTR Workbench
FEM_FrontISTR: A parallel nonlinear finite element analysis workbench for FreeCAD
Re: FEM_FrontISTR Workbench
It was not about you. You did everything right - you created a new feature and announced it correctly.
Meanwhile your feature stabilized so the forum moderators can move the topic to another subforum, in this case to the FEM subforum.
@chrisb, can you please do this?
chrisb wrote: .
Last edited by uwestoehr on Mon Jun 14, 2021 9:05 pm, edited 1 time in total.
Re: FEM_FrontISTR Workbench
Moved.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 1
- Joined: Thu Apr 20, 2023 11:33 pm
Re: FEM_FrontISTR Workbench
Hi! I would like to ask if this workbench is still maintained. FrontISTR seems to have a lot of potential, but I cannot test the solver's advanced functionalities using Japanese pre/post-processors such as REVOCAP and EasyISTR. The documentation available in English is excellent by the way!
Best regards
Best regards
-
- Veteran
- Posts: 3158
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: FEM_FrontISTR Workbench
Here it works on
I did the manual installation:
Code: Select all
OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.20.2.29177 +426 (Git)
Build type: Release
Branch: (HEAD detached from 0.20.2)
Hash: 930dd9a76203a3260b1e6256c70c1c3cad8c5cb8
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.3
Locale: German/Germany (de_DE)
Installed mods:
* BIM 2021.12.0
* CfdOF 1.25.3
* CurvedShapes 1.0.8
* CurvesWB 0.6.29
* Defeaturing 1.2.0
* dodo 1.0.0
* Fasteners 0.5.15
* FEM_FrontISTR 0.1.0
* Manipulator 1.5.0
* Plot 2022.4.17
* Reinforcement
* WorkFeature
I did the manual installation: