Hi,
i new user of FreeCAD and i am pretty sure i am something doing wrong, but cannot figure it out neither found someone with same problem.
When I am placing constraints for FEM analysis this constraints are not tied to selected face, but are shown in some kind of offset from body. What have i done wrong here ? FreeCAD file attached. Version of FreeCAD is 0.19, Release 4/12/2021.
Thank you
FEM constraint placed with offset to face
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
FEM constraint placed with offset to face
- Attachments
-
- Letev utorna.FCStd
- (46.82 KiB) Downloaded 19 times
Re: FEM constraint placed with offset to face
Moved from Help forum.
Please attach your full FreeCAD info as described in the IMPORTANT forum rules linked in the help forum.
Please attach your full FreeCAD info as described in the IMPORTANT forum rules linked in the help forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: FEM constraint placed with offset to face
Set the placement of the Body to 0,0,0, then it will work.
Greetings
user1234
Sorry for pinging, but should not FEM respect the Bodies (or Part containers) placement?bernd wrote:ping
Greetings
user1234
Re: FEM constraint placed with offset to face
Moved to FEM forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.