[fixed] In Post pipeline from result there is no Max - Min Principal Stress
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
-
- Posts: 11
- Joined: Sun Mar 13, 2022 7:54 pm
- Location: Україна/Ukraine
- Contact:
[fixed] In Post pipeline from result there is no Max - Min Principal Stress
Hello!
In Post pipeline from result there is no Max - Min Principal Stress
In previous release we had three additional lines in "Field" scrollbar:
Max Principal Stress
Med Principal Stress
Min Principal Stress
Now in 0.20 i cant find them. Looks like it is a "bug". This possible avoid by using "user defined equation" but it's not convenient
And if use "user defined equation", and after choose in Post pipeline "UserDefinedMyName" we still get results in MPa although must be Pa
This make FEM unusable OS: Windows 7 Version 6.1 (Build 7601: SP 1)
Word size of FreeCAD: 64-bit
Version: 0.20.29177 (Git)
Build type: Release
Branch: releases/FreeCAD-0-20
Hash: 68e337670e227889217652ddac593c93b5e8dc94
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.2
Locale: Ukrainian/Ukraine (uk_UA)
Installed mods:
* dxf-library
* Reinforcement
In Post pipeline from result there is no Max - Min Principal Stress
In previous release we had three additional lines in "Field" scrollbar:
Max Principal Stress
Med Principal Stress
Min Principal Stress
Now in 0.20 i cant find them. Looks like it is a "bug". This possible avoid by using "user defined equation" but it's not convenient
And if use "user defined equation", and after choose in Post pipeline "UserDefinedMyName" we still get results in MPa although must be Pa
This make FEM unusable OS: Windows 7 Version 6.1 (Build 7601: SP 1)
Word size of FreeCAD: 64-bit
Version: 0.20.29177 (Git)
Build type: Release
Branch: releases/FreeCAD-0-20
Hash: 68e337670e227889217652ddac593c93b5e8dc94
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.2
Locale: Ukrainian/Ukraine (uk_UA)
Installed mods:
* dxf-library
* Reinforcement
-
- Veteran
- Posts: 3158
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: In Post pipeline from result there is no Max - Min Principal Stress
Do you mean this?
Word size of FreeCAD: 64-bit
Version: 0.20.27428 (Git)
Build type: Release
Branch: master
Hash: 27460358508a2057e0ec57a418641435f12628dd
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.3
Locale: German/Germany (de_DE)
OS: Windows 10 Version 2009Word size of FreeCAD: 64-bit
Version: 0.20.27428 (Git)
Build type: Release
Branch: master
Hash: 27460358508a2057e0ec57a418641435f12628dd
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.3
Locale: German/Germany (de_DE)
-
- Veteran
- Posts: 3158
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: In Post pipeline from result there is no Max - Min Principal Stress
Confirmed
Used latest conda-built.
Major/Minor/Intermediate stresses are missing.
Export ccx-result as vtk, load in Paraview gives error,
no results imported, only the solid.
Used latest conda-built.
Major/Minor/Intermediate stresses are missing.
Export ccx-result as vtk, load in Paraview gives error,
no results imported, only the solid.
Re: In Post pipeline from result there is no Max - Min Principal Stress
That’s likely because of this: https://forum.freecadweb.org/viewtopic.php?f=18&t=69385
-
- Posts: 11
- Joined: Sun Mar 13, 2022 7:54 pm
- Location: Україна/Ukraine
- Contact:
Re: In Post pipeline from result there is no Max - Min Principal Stress
Yes. This line missed.
-
- Posts: 11
- Joined: Sun Mar 13, 2022 7:54 pm
- Location: Україна/Ukraine
- Contact:
Re: In Post pipeline from result there is no Max - Min Principal Stress
May be... So, only solution is wait for next release?NewJoker wrote: ↑Sat Jun 18, 2022 11:41 am That’s likely because of this: https://forum.freecadweb.org/viewtopic.php?f=18&t=69385
Re: In Post pipeline from result there is no Max - Min Principal Stress
If you don’t want to wait for the next stable release, you can always use the dev version (weekly builds). This fix will likely be included in it quite soon.Danial Iskhakov wrote: ↑Sat Jun 18, 2022 9:38 pm May be... So, only solution is wait for next release?
Re: In Post pipeline from result there is no Max - Min Principal Stress
For information: the regression went sadly in the last day before the release. In FreeCAD 0.20.1 this will be fixed. FreeCAD 0.20.1 is scheduled to be released in about 10 days.