Make a multiple hollow objects in one body

About the development of the Part Design module/workbench. PLEASE DO NOT POST HELP REQUESTS HERE!
LordMax2
Posts: 2
Joined: Fri Jul 09, 2021 12:44 pm

Make a multiple hollow objects in one body

Postby LordMax2 » Fri Jul 09, 2021 12:50 pm

Hi!

I am pretty new to FreeCAD and have been using SketchUp and a little bit of AutoCAD before. I am making a box for my drone that Ive built myself, the goal is to have a box with 4 holes and small sockets to put the components into. I have made a box but I cannot manage to make my "sockets" hollow. I have attached a screenshot of my project. Thanks beforehand!

Best regards Max
Attachments
Screenshot of my project
Screenshot of my project
Skärmklipp.PNG (152.76 KiB) Viewed 732 times
chrisb
Posts: 35957
Joined: Tue Mar 17, 2015 9:14 am

Re: Make a multiple hollow objects in one body

Postby chrisb » Fri Jul 09, 2021 7:03 pm

Hi and welcome to the forum!

Add a pocket to remove the additional material.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
LordMax2
Posts: 2
Joined: Fri Jul 09, 2021 12:44 pm

Re: Make a multiple hollow objects in one body

Postby LordMax2 » Fri Jul 09, 2021 9:15 pm

It worked!! Thank you!