Reversed Sweep doesn't work?

About the development of the Part Design module/workbench. PLEASE DO NOT POST HELP REQUESTS HERE!
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
Vincent B
Veteran
Posts: 4713
Joined: Sun Apr 05, 2015 9:02 am
Location: La Rochelle, France

Reversed Sweep doesn't work?

Post by Vincent B »

Is the reversed and mid plane mode are implemended with sweep feature?
Attachments
Capture.JPG
Capture.JPG (73.6 KiB) Viewed 1116 times
ReverseSweep.FCStd
(14.18 KiB) Downloaded 53 times
ickby
Veteran
Posts: 3116
Joined: Wed Oct 05, 2011 7:36 am

Re: Reversed Sweep doesn't work?

Post by ickby »

No, actually those two properties do not make any sense for the sweep and loft tools. They come from the implementation, as both are based on the "SketchBased" class which brings those properties. But they are not really used. That should be changed somehow.
User avatar
Vincent B
Veteran
Posts: 4713
Joined: Sun Apr 05, 2015 9:02 am
Location: La Rochelle, France

Re: Reversed Sweep doesn't work?

Post by Vincent B »

For a path's sweep, this can avoid to define an other sketch.
Post Reply