I am searching an icon, SOLVED
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
-
- Posts: 68
- Joined: Wed Feb 24, 2021 10:02 am
- Contact:
I am searching an icon, SOLVED
Hello every soul !
0.18, Mac OS
I am told about an icon, which is not present as far as I can see. I mean the one placed on the left, on the same line with "Unamed" (under Application), in "Using Part Design workbench, tracing the sketch".
It must be a very simple thing to find, but difficult when beginning.
Thanks a lot !
https://wiki.freecadweb.org/Creating_a_ ... PartDesign
0.18, Mac OS
I am told about an icon, which is not present as far as I can see. I mean the one placed on the left, on the same line with "Unamed" (under Application), in "Using Part Design workbench, tracing the sketch".
It must be a very simple thing to find, but difficult when beginning.
Thanks a lot !
https://wiki.freecadweb.org/Creating_a_ ... PartDesign
Last edited by L'OmDessine on Wed Feb 24, 2021 8:59 pm, edited 1 time in total.
Re: I am searching an icon
It's not an icon you can click on in the toolbar. It occurs in the tree as soon as you create a new or load an existing document.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 68
- Joined: Wed Feb 24, 2021 10:02 am
- Contact:
Re: I am searching an icon
Ok, thanks Chrisb
-
- Posts: 68
- Joined: Wed Feb 24, 2021 10:02 am
- Contact:
Re: I am searching an icon
Yes, but I don't see how to go to Application. If I want to rename the Body, I expect it is here, or even, too try it.
Re: I am searching an icon
For renaming a body you can use the right mouse context menu. To rename the whole model, save it under a new name.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 68
- Joined: Wed Feb 24, 2021 10:02 am
- Contact:
Re: I am searching an icon
yes, simple, indeed !
Re: I am searching an icon
Please mark discussion as [Solved] by editing the first post title of this thread
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
-
- Posts: 68
- Joined: Wed Feb 24, 2021 10:02 am
- Contact:
Re: I am searching an icon
Yep, I don't know how to put "Soved" a question !
Re: I am searching an icon
Edit the first post by clicking on the pencils at the rigth top. Then change the subject by adding the text "[solved]".
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 68
- Joined: Wed Feb 24, 2021 10:02 am
- Contact:
Re: I am searching an icon
But I don't localise them ! I see the icons : Modify message, "report" message and Answer by quoting the message.