- 210301 XYZ All 0 - 640x310.png (109.23 KiB) Viewed 1691 times
- 210301 Z 30 - 640x305.png (110.04 KiB) Viewed 1691 times
I guess you all know that
- and knowing about it you can just allow for it - but I didn't see it reported.Attachment positioning of a sketch
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Attachment positioning of a sketch
With the Attachment Position parameters all set to nought my sketch appears at the Origin as expected
When I change the Z parameter to 30 the sketch moves on the X axis
The same sort of thing applies to the other axes (a change in X begets movement along the Y axis etc.
I guess you all know that - and knowing about it you can just allow for it - but I didn't see it reported.
I guess you all know that
- and knowing about it you can just allow for it - but I didn't see it reported.- Attachments
-
- 210301 Y 30.png (127.68 KiB) Viewed 1691 times
-
- 210301 XYZ All 0.png (126.75 KiB) Viewed 1691 times
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Attachment positioning of a sketch
It is documented on the Part Attachment page.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Attachment positioning of a sketch
I don't know why I didn't find that.
I better spend some time with that.
Sorry to bother you.
I better spend some time with that.
Sorry to bother you.
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble