Updated Assembly 3 tutorials

Discussion about the development of the Assembly workbench.
User avatar
jpg87
Posts: 548
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Updated Assembly 3 tutorials

Postby jpg87 » Fri Apr 23, 2021 7:00 pm

Hello,
I have just resumed my pages and videos concerning a simple example, but with version 0.11 of Assembly 3 WB of April 11, 2021.
http://help-freecad-jpg87.fr/025_ass_ex_creat.php


I also added a few pages ...
http://help-freecad-jpg87.fr/0270_ass_FAQ.php
My website : http://help-freecad-jpg87.fr updated 2021/05/27
User avatar
bambuko
Posts: 519
Joined: Thu Oct 24, 2019 12:53 pm
Location: UK, England, North Devon

Re: Updated Assembly 3 tutorials

Postby bambuko » Sat Apr 24, 2021 8:43 am

jpg87 wrote: Fri Apr 23, 2021 7:00 pm ...
Thank you!
If I understand it correctly 0.11 of Assembly 3 WB is at the moment available only as part of daily release of realthunder's branch?

It is only stable branch that is in sync with 0.19?
User avatar
jpg87
Posts: 548
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Re: Updated Assembly 3 tutorials

Postby jpg87 » Sat Apr 24, 2021 12:08 pm

bambuko wrote: Sat Apr 24, 2021 8:43 am It is only stable branch that is in sync with 0.19?
Hello,
In the installable (and stable) version 0.19.1 of the official FreeCAD branch, there was no Assembly 3, for solver licensing issues if I understood correctly.
So I did some tests comparing the different versions and I copied from the version of Realthunder of April 11, 2021 the following files:
fromLinkFreeCAD1.jpg
fromLinkFreeCAD1.jpg (143.82 KiB) Viewed 767 times
fromLinkFreeCAD2.jpg
fromLinkFreeCAD2.jpg (73.42 KiB) Viewed 767 times

... to the official branch files:
ToFreeCADofficial1.jpg
ToFreeCADofficial1.jpg (144.73 KiB) Viewed 767 times
ToFreeCADofficial2.jpg
ToFreeCADofficial2.jpg (72.51 KiB) Viewed 767 times
Et tout a fonctionné.
My website : http://help-freecad-jpg87.fr updated 2021/05/27
FreeCutter
Posts: 24
Joined: Mon Aug 26, 2019 5:52 pm

Re: Updated Assembly 3 tutorials

Postby FreeCutter » Fri May 14, 2021 7:09 pm

Thanks a lot for your very well designed and constructed page - it is/was a very good introduction for me to get going with Assembly3!

Just found one little issue with this link on side "more examples" above the text "Files to test constraints and "natural" links."
http://www.help-freecad-jpg87.fr/00fr/0 ... 87_2020.7z

The zip-file is neither opening nor could be downloaded (?)
User avatar
jpg87
Posts: 548
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Re: Updated Assembly 3 tutorials

Postby jpg87 » Fri May 14, 2021 9:09 pm

FreeCutter wrote: Fri May 14, 2021 7:09 pm The zip-file is neither opening nor could be downloaded (?)
Hi,
It is a .zip file, so to download it you need to right click then "save link target under ...".
Then you unzip it with 7zip.
Good work.
My website : http://help-freecad-jpg87.fr updated 2021/05/27