Collection of differences between original master version and realthunder

Report observations made with the new Toponaming branch.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Differences between original master version and realthunder

Post by thomas-neemann »

K0DPW wrote: Thu Oct 14, 2021 5:55 pm
you could try to install a master version running on a stick and then copy the realthunder version over it, then everything could be there
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
K0DPW
Posts: 25
Joined: Mon Aug 24, 2015 8:04 pm
Location: USA

Re: Collection of differences between original master version and realthunder

Post by K0DPW »

thomas-neemann wrote:
you could try to install a master version running on a stick and then copy the realthunder version over it, then everything could be there
Thanks for your reply - I made a mistake in my initial post - the VCRUNTIME140_1.dll and VCRUNTIME140.dll file was available in the DLL folder within the BIN folder, but not in the BIN folder itself.

When I copied both files from the DLL folder, and pasted them directly into the BIN folder, now it worky OK.
Universal definition of truth applicable to ALL disciplines:

"Truth Does Not Contradict Itself"
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

this bar can be switched off in realthunder.

1.jpg
1.jpg (91.01 KiB) Viewed 5567 times


here a workaround for master

Code: Select all

FreeCADGui.draftToolBar.Deactivated()
I found that here
https://forum.freecadweb.org/viewtopic. ... 20#p263706



edit


can you start freecad with this python command as an option?
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

test: loading a large fcstd file (204 mb) . master aborted after 20 minutes due to memory overflow.


OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26306 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 6701788)
Hash: 670178869ecdca52f7dcd332c513cb0c82b25cce
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)




realthunder approx. 5 min.



OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2021.1015.24301 +4280 (Git) AppImage
Build type: Release
Branch: LinkDaily
Hash: 556c87868ea46796242156e9f73eae98259794b7
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.1
OCC version: 7.5.2
Locale: German/Germany (de_DE)


here is the test file (stp) that I saved as fcstd.


https://grabcad.com/library/isolation-g ... ing-line-1

https://www.youtube.com/watch?v=tiwl_suatd8


phpBB [video]
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

in the master and in realthunder the catch function lights up in the yellow circle, but it is not caught. an error message is thrown. a point on the object is probably necessary beforehand in order to get the result.

in realthunder, the defining geometry function generates the desired result with one click

https://www.youtube.com/watch?v=95tRqX7P3EQ

phpBB [video]



OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26554 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 817c14b)
Hash: 817c14b16af681b06aec7d8c79f744c7a88fa3c3
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)



OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2021.1015.24301 +4280 (Git) AppImage
Build type: Release
Branch: LinkDaily
Hash: 556c87868ea46796242156e9f73eae98259794b7
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.1
OCC version: 7.5.2
Locale: German/Germany (de_DE)
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

to create this part,


2.png
2.png (34.46 KiB) Viewed 4052 times

it makes sense to edit the sketch from both sides, also in connection with
1.png
1.png (2.12 KiB) Viewed 4052 times

in the realthunder version on maped sketches "map reversed" is available
3.png
3.png (17.61 KiB) Viewed 4052 times


edit

in master also possible
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
chrisb
Veteran
Posts: 53919
Joined: Tue Mar 17, 2015 9:14 am

Re: Collection of differences between original master version and realthunder

Post by chrisb »

thomas-neemann wrote: Tue Jan 18, 2022 5:57 pm in master also possible
Since years!
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

chrisb wrote: Tue Jan 18, 2022 9:04 pm
thomas-neemann wrote: Tue Jan 18, 2022 5:57 pm in master also possible
Since years!
I had tried it before, but forgot. I noticed it with a video, I thought it would solve the problem with the mirrored sketches. it at least solves the problem with the empty sketch between two parts.
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

deleted because it was wrong
Last edited by thomas-neemann on Mon Jan 24, 2022 5:10 pm, edited 2 times in total.
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
Post Reply